Disclaimer
How to change front anti roll bar links on Mercedes Vito W638 – replacement guide
downloads:
0
Views:
52
Important!
This replacement procedure can be used for:
MERCEDES-BENZ VITO Bus (638) 113 2.0 (638.114, 638.194), MERCEDES-BENZ VITO Bus (638) 108 CDI 2.2 (638.194), MERCEDES-BENZ VITO Bus (638) 110 CDI 2.2 (638.194) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ VITO Bus (638) 113 2.0 (638.114, 638.194), MERCEDES-BENZ VITO Bus (638) 108 CDI 2.2 (638.194), MERCEDES-BENZ VITO Bus (638) 110 CDI 2.2 (638.194) … View more
The steps may slightly vary depending on the car design.
How to change front anti roll bar link on MERCEDES-BENZ VITO 1 (W638) [TUTORIAL AUTODOC]

All the parts you need to replace – Anti Roll Bar Links for VITO Bus (638) and other MERCEDES-BENZ models
Alternative products

Wire brush
WD-40 spray
Copper grease
Drive socket # 16
Combination spanner #16
Wheel impact socket #17
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on Mercedes Vito W638 in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – Mercedes Vito W638. Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3
Raise the front of the car and secure on supports. - Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. Mercedes Vito W638 - Step 5
Remove the wheel. - Step 6.1
Clean the stabiliser link fasteners.Step 6.2
Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a drive socket #16. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #16. Use a drive socket #16. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – Mercedes Vito W638. Tip from AUTODOC:Examine stabiliser bushes. Replace them if needed. - Step 10
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ Vito Minibus (W638) model
Popular maintenance tutorials for Mercedes W638 Minibus
Complete guides for changing the Drop links on different MERCEDES-BENZ VITO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ VITO Bus (638)
View more
The Ultimate Guide to Engine Bay Cleaning | AUTODOC
How to get your motorcycle ready for spring
5 easy car repairs you can do without a garage visit
Prevent Breakdowns: Key Car Checks After Winter | AUTODOC Guide
Most commonly replaced car parts on MERCEDES-BENZ VITO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























