Disclaimer
How to change front anti roll bar links on FORD FUSION Saloon CD3 – replacement guide
downloads:
0
Views:
18
Important!
This replacement procedure can be used for:
FORD FUSION Saloon CD3 2.5, FORD FUSION Saloon CD3 2.3 … View more
The steps may slightly vary depending on the car design.
FORD FUSION Saloon CD3 2.5, FORD FUSION Saloon CD3 2.3 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for FUSION Saloon CD3 and other FORD models
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Drive socket # 17
Wheel impact socket #19
Ratchet wrench
Torque wrench
Wheel chock
Replacement: anti roll bar links – FORD FUSION Saloon CD3 Professionals recommend:
- Replace the stabiliser links on FORD FUSION Saloon CD3 in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – FORD FUSION Saloon CD3 Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: anti roll bar links – FORD FUSION Saloon CD3 AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17 (2 pieces). - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – FORD FUSION Saloon CD3 AUTODOC experts recommend:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Ιnstall the transverse stabilizer link. - Step 12
Tighten the stabiliser link fastener. Use a drive socket #17. Use a ratchet wrench. - Step 13
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 14
Ιnstall the transverse stabilizer link.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Fusion Saloon (CD3) model
Popular maintenance tutorials for Ford Fusion CD3
Free download PDF
2.67 MB
Free download PDF3.8 MB
Free download PDF921.6 KB
Free download PDF7.83 MB
Free download PDF2.14 MB
Free download PDF2.92 MB
Complete guides for changing the Drop links on different FORD FUSION models
Free download PDF1.42 MB
Free download PDF972.8 KB
Free download PDF1.99 MB
Free download PDF1.31 MB
Free download PDF1.29 MB
Free download PDF1.27 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD FUSION Saloon CD3
View more
What to do if your car’s bonnet won’t open | AUTODOC tips
Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
Top 7 signs of a bad starter
#DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!
Most commonly replaced car parts on FORD FUSION
Time to replace parts? Get even better deals in our Shop app.
SCAN ME