Important!
This replacement procedure can be used for:
FORD Focus II Hatchback (DA_, HCP, DP) 1.6, FORD Focus II Hatchback (DA_, HCP, DP) 1.6 Ti, FORD Focus II Hatchback (DA_, HCP, DP) 2.0, FORD Focus II Hatchback (DA_, HCP, DP) 1.4, FORD Focus II Hatchback (DA_, HCP, DP) 1.6 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 2.0 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 1.6 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 1.8 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 2.5 ST, FORD Focus II Hatchback (DA_, HCP, DP) 1.8 Flexifuel, FORD Focus II Hatchback (DA_, HCP, DP) 2.0 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 1.8, FORD Focus II Hatchback (DA_, HCP, DP) 2.0 CNG, FORD Focus II Hatchback (DA_, HCP, DP) 2.0 LPG, FORD Focus II Hatchback (DA_, HCP, DP) 1.6 LPG View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for Focus II Hatchback (DA_, HCP, DP) and other FORD models
How to change Anti-roll bar link on Ford Focus Mk2 1.6 TDCi – step-by-step instructions for straightforward car repair
Anti-roll bar link
How to change Rod / Strut, wheel suspension on Ford Focus Mk2 1.6 TDCi – step-by-step instructions for straightforward car repair
Rod / Strut, wheel suspension
How to change Repair Kit, stabilizer suspension on Ford Focus Mk2 1.6 TDCi – step-by-step instructions for straightforward car repair
Repair Kit, stabilizer suspension
How to change Repair Kit, stabilizer coupling rod on Ford Focus Mk2 1.6 TDCi – step-by-step instructions for straightforward car repair
Repair Kit, stabilizer coupling rod
How to change Torsion Bar Linkage on Ford Focus Mk2 1.6 TDCi – step-by-step instructions for straightforward car repair
Torsion Bar Linkage
Tools
Replacement: anti roll bar links – FORD FOCUS II (DA_). Tools you need:
Wire brush
WD-40 spray
Copper grease
Impact socket №15
Combination spanner #15
Wheel impact socket #19
Ratchet wrench
Torque wrench
Wheel chock
Replacement: anti roll bar links – FORD FOCUS II (DA_). Tip from AUTODOC experts:
  • Replace the stabiliser links on FORD FOCUS II (DA_) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – FORD FOCUS II (DA_). Recommended sequence of steps:
  1. Step 1
    How to change Anti Roll Bar Links on Ford Focus Mk2 2004 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace FORD Focus II Hatchback (DA_, HCP, DP) 1.6 TDCi 2005 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Ford Focus Mk2 1.8 TDCi 2006 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. FORD FOCUS II (DA_)
  4. Step 5
    Changing Anti Roll Bar Links on FORD Focus II Hatchback (DA_, HCP, DP) 2.5 ST 2007 by yourself
    Remove the wheel.
  5. Step 6
    How to remove FORD FOCUS 1.6 Ti 2008 Anti Roll Bar Links - online easy-to-follow instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Anti Roll Bar Links on FORD Focus II Hatchback (DA_, HCP, DP) 2009: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #15.
  7. Step 8
    How hard is it to do yourself: Anti Roll Bar Links replacement on Ford Focus Mk2 1.8 Flexifuel 2010 - download illustrated guide
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 9
    Need to know how to renew Anti Roll Bar Links on FORD FOCUS 2011? This free workshop manual will help you to do it yourself
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a ratchet wrench.
  9. Step 10
    Changing of Anti Roll Bar Links on Ford Focus Mk2 2012 won't be an issue if you follow this illustrated step-by-step guide
    Remove the stabilizer rod.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FORD Focus II Hatchback (DA_, HCP, DP) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FORD Focus II Hatchback (DA_, HCP, DP) Anti Roll Bar Links replacement - online guide
Tips & tricks for your FORD Focus II Hatchback (DA_, HCP, DP)
View more
  • How to change Drop links on FORD Focus II Hatchback (DA_, HCP, DP) 1.6 - replacement tricks
    DIY alternator repair | AUTODOC tips
  • Changing Stabilizer link Ford Focus Mk2 1.6 TDCi - Replacement Tips
    DIY starter repair | AUTODOC tips
  • Maintenance Hacks - FORD Focus II Hatchback (DA_, HCP, DP) 1.8 TDCi Sway bar link replacement guide
    5 car interior cleaning mistakes | AUTODOC tips
  • Replace Drop link on Ford Focus Mk2 - free video tips
    DIY car soundproofing | AUTODOC tips