Disclaimer
How to change front anti roll bar links on FORD C-Max (DM2) – replacement guide
downloads:
11
Views:
199
Important!
This replacement procedure can be used for:
FORD C-MAX (DM2) 1.6, FORD C-MAX (DM2) 1.8, FORD C-MAX (DM2) 1.8 Flexifuel, FORD C-MAX (DM2) 2.0, FORD C-MAX (DM2) 1.6 TDCi, FORD C-MAX (DM2) 1.6 TDCi, FORD C-MAX (DM2) 2.0 TDCi, FORD C-MAX (DM2) 2.0 TDCi, FORD C-MAX (DM2) 1.8 TDCi, FORD C-MAX (DM2) 2.0 CNG, FORD C-MAX (DM2) 2.0 LPG … View more
The steps may slightly vary depending on the car design.
FORD C-MAX (DM2) 1.6, FORD C-MAX (DM2) 1.8, FORD C-MAX (DM2) 1.8 Flexifuel, FORD C-MAX (DM2) 2.0, FORD C-MAX (DM2) 1.6 TDCi, FORD C-MAX (DM2) 1.6 TDCi, FORD C-MAX (DM2) 2.0 TDCi, FORD C-MAX (DM2) 2.0 TDCi, FORD C-MAX (DM2) 1.8 TDCi, FORD C-MAX (DM2) 2.0 CNG, FORD C-MAX (DM2) 2.0 LPG … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for C-MAX (DM2) and other FORD models
Alternative products

Wire brush
WD-40 spray
Copper grease
Impact socket №15
Combination spanner #15
Wheel impact socket #19
Ratchet wrench
Torque wrench
Wheel chock
Replacement: anti roll bar links – FORD C-MAX (DM2). Tip from AUTODOC experts:
- Replace the stabiliser links on FORD C-MAX (DM2) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – FORD C-MAX (DM2). Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. FORD C-MAX (DM2) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #15. - Step 8
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 9
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a ratchet wrench. - Step 10
Remove the stabilizer rod.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD C-Max (DM2) model
Popular maintenance tutorials for Ford C-Max DM2
Complete guides for changing the Drop links on different FORD C-MAX models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD C-MAX (DM2)
View more
Prevent Breakdowns: Key Car Checks After Winter | AUTODOC Guide
5 tools that make car repair incredibly simple | AUTODOC tips
5 signs of a faulty strut mount and how to fix it
5 mistakes when replacing consumables
Most commonly replaced car parts on FORD C-MAX
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





























