Important!
This replacement procedure can be used for:
FORD C-MAX (DM2) 1.8, FORD C-MAX (DM2) 2.0 TDCi, FORD C-MAX (DM2) 1.6 TDCi, FORD C-MAX (DM2) 1.6, FORD C-MAX (DM2) 1.8, FORD C-MAX (DM2) 1.8 Flexifuel, FORD C-MAX (DM2) 2.0, FORD C-MAX (DM2) 1.6 TDCi, FORD C-MAX (DM2) 1.6 TDCi, FORD C-MAX (DM2) 2.0 TDCi, FORD C-MAX (DM2) 2.0 TDCi, FORD C-MAX (DM2) 1.8 TDCi, FORD C-MAX (DM2) 2.0 CNG, FORD C-MAX (DM2) 2.0 LPG, FORD C-MAX (DM2) 1.6 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Control Arm for C-MAX (DM2) and other FORD models
Alternative products
How to change Suspension arm on Ford C-Max DM2 1.8 TDCi – step-by-step instructions for straightforward car repair Suspension arm
Tools
Replacement: front lower arm – FORD C-MAX (DM2). Tools you might need:
Wire brush
WD-40 spray
Copper grease
Drive socket # 15
Drive socket # 18
Combination spanner #22
Wheel impact socket #19
Ratchet wrench
Torque wrench
Ball joint puller
Crow bar
Hydraulic transmission jack
Wheel chock
Replacement: front lower arm – FORD C-MAX (DM2). AUTODOC recommends:
  • The replacement procedure is identical for the left and right lower control arms.
  • Replacement of the independent suspension lower arm in some cars requires a part of the outlet piping of the additional heater to be removed.
  • Please note: all work on the car – FORD C-MAX (DM2) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Control Arm on Ford C-Max DM2 2007 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace FORD C-MAX (DM2) 1.8 TDCi 2008 Control Arm - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Ford C-Max DM2 1.6 TDCi 2009 Control Arm replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: front lower arm – FORD C-MAX (DM2). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Control Arm on FORD C-MAX (DM2) 1.6 2010 by yourself
    Remove the wheel.
  5. Step 6
    Remove the lower sound insulation.
    Please note!
    Some cars are not equipped with the lower sound insulation.
    Step 7
    How to remove FORD C-MAX 1.8 2007 Control Arm - online easy-to-follow instructions
    Clean all joints of the arm. Use a wire brush. Treat all joints of the arm. Use WD-40 spray.
    AUTODOC recommends:
    Replacement: front lower arm – FORD C-MAX (DM2). After applying the spray, wait a few minutes.Wear protective goggles.
  6. Step 8
    How to replace Control Arm on FORD C-MAX (DM2) 2008: download PDF manuals and video instructions
    Unscrew the ball joint fastening nut. Use a combination spanner #22.
  7. Step 9
    How hard is it to do yourself: Control Arm replacement on Ford C-Max DM2 2.0 2009 - download illustrated guide
    Unscrew the fastening nut, remove the control arm from the steering knuckle, using a ball joint puller.
  8. Step 10
    Need to know how to renew Control Arm on FORD C-MAX 2010? This free workshop manual will help you to do it yourself
    Unscrew the front arm fastener. Use a drive socket #18. Use a ratchet wrench.
  9. Step 11
    Changing of Control Arm on Ford C-Max DM2 2007 won't be an issue if you follow this illustrated step-by-step guide
    Remove the front fastener of the control arm. Use a crowbar. Use a hammer.
  10. Step 12
    FORD C-MAX 1.8 TDCi Control Arm replacement: online guides and video tutorials
    Unscrew the rear arm fastener. Use a drive socket #15. Use a ratchet wrench.
  11. Step 13
    Replacing Control Arm on Ford C-Max DM2 2009 1.8 TDCi by yourself
    Remove the rear fastener of the control arm.
  12. Step 14
    C-MAX (DM2) 1.8 2010 Control Arm DIY replacement workshop manual
    Remove the arm. Use a crowbar.
  13. Step 15
    How to change Control Arm on FORD C-MAX (DM2) 2007 - tips and tricks
    Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
  14. Step 16
    Step-by-step recommendations for DIY replacement Ford C-Max DM2 2008 1.8 Control Arm
    Install a new arm.
    Replacement: front lower arm – FORD C-MAX (DM2). AUTODOC experts recommend:
    During the installation process, use only new bolts and nuts.Do not damage the ball joint cover.
  15. Step 17
    DIY replacement of Control Arm on FORD C-MAX (DM2) 2.0 TDCi 2009 is not an issue anymore with our step-by-step tutorial
    Install the front fastener of the arm. Do not tighten it.
  16. Step 18
    How to change Control Arm on Ford C-Max DM2 2007 - free PDF and video manuals
    Connect the ball joint to the steering knuckle.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FORD C-Max (DM2) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY FORD C-MAX (DM2) Control Arm replacement - online guide
Tips & tricks for your FORD C-MAX (DM2)
View more
  • How to change Control arm on FORD C-MAX (DM2) 2.0 TDCi - replacement tricks
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
  • Changing Wishbone Ford C-Max DM2 1.8 TDCi - Replacement Tips
    5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
  • Maintenance Hacks - FORD C-MAX (DM2) 1.6 TDCi Control arms replacement guide
    DIY car soundproofing | AUTODOC tips
  • Replace Trailing arm on Ford C-Max DM2 - free video tips
    Kolbenschmidt plastic gauge overview
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
FORD C-MAX (DM2) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME