Disclaimer
How to change front anti roll bar bushes on VAUXHALL Corsa Mk I (B) Hatchback (S93) – replacement guide
downloads:
2
Views:
83
Important!
This replacement procedure can be used for:
VAUXHALL Corsa Mk I (B) Hatchback (S93) 1.0 i 12V, VAUXHALL Corsa Mk I (B) Hatchback (S93) 1.2 i, VAUXHALL Corsa Mk I (B) Hatchback (S93) 1.4 i, VAUXHALL Corsa Mk I (B) Hatchback (S93) 1.4 i S, VAUXHALL Corsa Mk I (B) Hatchback (S93) 1.4 i 16V, VAUXHALL Corsa Mk I (B) Hatchback (S93) 1.6 i 16V, VAUXHALL Corsa Mk I (B) Hatchback (S93) 1.6 GSI 16V, VAUXHALL Corsa Mk I (B) Hatchback (S93) 1.5 D, VAUXHALL Corsa Mk I (B) Hatchback (S93) 1.5 TD, VAUXHALL Corsa Mk I (B) Hatchback (S93) 1.7 D, VAUXHALL Corsa Mk I (B) Hatchback (S93) 1.2 i 16V … View more
The steps may slightly vary depending on the car design.
VAUXHALL Corsa Mk I (B) Hatchback (S93) 1.0 i 12V, VAUXHALL Corsa Mk I (B) Hatchback (S93) 1.2 i, VAUXHALL Corsa Mk I (B) Hatchback (S93) 1.4 i, VAUXHALL Corsa Mk I (B) Hatchback (S93) 1.4 i S, VAUXHALL Corsa Mk I (B) Hatchback (S93) 1.4 i 16V, VAUXHALL Corsa Mk I (B) Hatchback (S93) 1.6 i 16V, VAUXHALL Corsa Mk I (B) Hatchback (S93) 1.6 GSI 16V, VAUXHALL Corsa Mk I (B) Hatchback (S93) 1.5 D, VAUXHALL Corsa Mk I (B) Hatchback (S93) 1.5 TD, VAUXHALL Corsa Mk I (B) Hatchback (S93) 1.7 D, VAUXHALL Corsa Mk I (B) Hatchback (S93) 1.2 i 16V … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Bushes for Corsa Mk I (B) Hatchback (S93) and other VAUXHALL models
Alternative products

Wire brush
WD-40 spray
Copper grease
Drive socket # 13
Ratchet wrench
Torque wrench
Hydraulic transmission jack
Replacement: anti roll bar bushes – VAUXHALL CORSA Mk I (B). AUTODOC recommends:
- Both stabilizer bushes should be replaced simultaneously.
- The replacement procedure is identical for the right and left stabilizer bushes.
- All work should be done with the engine stopped.
Replacement: anti roll bar bushes – VAUXHALL CORSA Mk I (B). Use the following procedure:
- Step 1
Lift the car using a jack or place it over an inspection pit. - Step 2
Clean the fasteners of the stabilizer bush brackets. Use a wire brush. Use WD-40 spray. - Step 3
Unscrew the fasteners of the stabilizer bush brackets. Use a drive socket #13. Use a ratchet wrench. - Step 4
Remove the stabilizer bush brackets. - Step 6
Remove the stabilizer bushes.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VAUXHALL Corsa Mk1 (B) Hatchback (S93) model
Popular maintenance tutorials for VAUXHALL CORSA Mk I (B)
Complete guides for changing the Stabilizer bushes on different VAUXHALL CORSA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VAUXHALL Corsa Mk I (B) Hatchback (S93)
View more
Three ways to change oil without a lift
Understanding Airbag Light Warnings | Essential Tips for Car Safety
What to do if your check engine light is on | AUTODOC tips
How to restore a steering wheel | AUTODOC tips
Most commonly replaced car parts on VAUXHALL CORSA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


















