
Disclaimer
How to change front anti roll bar bushes on Opel Corsa S93 – replacement guide
downloads:
11
Views:
144
Important!
This replacement procedure can be used for:
OPEL Corsa B Hatchback (S93) 1.4 i (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.5 D (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.5 TD (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.2 i (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.4 Si (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.6 GSI 16V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.4 i 16V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.6 i 16V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.7 D (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.0 i 12V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.2 i 16V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.2 i (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.4 i 16V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.6 i 16V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.4 (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.3 (F08, F68, M68) … View more
The steps may slightly vary depending on the car design.
OPEL Corsa B Hatchback (S93) 1.4 i (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.5 D (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.5 TD (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.2 i (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.4 Si (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.6 GSI 16V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.4 i 16V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.6 i 16V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.7 D (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.0 i 12V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.2 i 16V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.2 i (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.4 i 16V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.6 i 16V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.4 (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.3 (F08, F68, M68) … View more
The steps may slightly vary depending on the car design.
How to change front stabilizer bushes OPEL CORSA B TUTORIAL | AUTODOC

All the parts you need to replace – Anti Roll Bar Bushes for Corsa B Hatchback (S93) and other OPEL models
Anti roll bar bush
Alternative products

Wire brush
WD-40 spray
Copper grease
Drive socket # 13
Ratchet wrench
Torque wrench
Hydraulic transmission jack
Replacement: anti roll bar bushes – Opel Corsa S93. AUTODOC recommends:
- Both stabilizer bushes should be replaced simultaneously.
- The replacement procedure is identical for the right and left stabilizer bushes.
- All work should be done with the engine stopped.
Replacement: anti roll bar bushes – Opel Corsa S93. Use the following procedure:
- Step 1Lift the car using a jack or place it over an inspection pit.
- Step 2Clean the fasteners of the stabilizer bush brackets. Use a wire brush. Use WD-40 spray.
- Step 3Unscrew the fasteners of the stabilizer bush brackets. Use a drive socket #13. Use a ratchet wrench.
- Step 4Remove the stabilizer bush brackets.
- Step 6Remove the stabilizer bushes.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the OPEL Corsa B Hatchback (S93) model
Popular maintenance tutorials for Opel Corsa S93
Complete guides for changing the Stabilizer bushes on different OPEL CORSA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your OPEL Corsa B Hatchback (S93)
View more
- TOP 5 mistakes during DIY oil change | AUTODOC tips
- Top 5 possible reasons your car is shaking or vibrating
- Petrol or diesel: The engine showdown! | AUTODOC
- How to inspect and troubleshoot your car heater when it’s not working
Most commonly replaced car parts on OPEL CORSA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME