Only use the coolant recommended by the manufacturer.The coolant level should be at the MAX mark.Wait until the air goes out of the system.
Step 61
Install the coolant reservoir cap.
Step 62
Screw on the coolant reservoir cap.
Step 63
Install the air intake pipe and secure it.
Step 64
Screw in the fastener of the air intake pipe. Use a drive socket #10. Use a ratchet wrench.
Step 65
Run the engine for a few minutes. This should be done in order to remove residual air from the cooling system and to check if the components are operating correctly.
Step 66
Shut off the engine.
Step 67
Undo the bleed screw. Use a flat screwdriver. Wait until the air goes out of the system.
Step 68
Tighten the bleed screw.
Step 69
Check the coolant level. If necessary, top up to the required level.
Please note!
The coolant level should be at the MAX mark.
Step 70
Remove the fender protection cover.
Step 71
Close the hood.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 207 Hatchback model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your PEUGEOT 207 (WA_, WC_)
View more
Understanding Airbag Light Warnings | Essential Tips for Car Safety
Top 5 reasons why the suspension knocks | AUTODOC tips
How to replace a windscreen yourself | AUTODOC tips
Easy Steps to Fix Minor Scratches on Your Vehicle | AUTODOC tips