Error code U1900 is displayed and the check engine light is on - what does this mean?
The DTC U1900 is a manufacturer-specific error code that is recognized by the OBD system and indicates a problem in the CAN bus communication between different control units. This trouble code occurs when communication between the electronic modules in the vehicle is interrupted or disrupted. For different manufacturers, this fault code can have different specific meanings, but usually refers to network or communication errors in the vehicle.
What causes can this fault code have?
- Defective CAN bus wiring or damaged cables
- Faulty plug connections on the control units
- Failed or defective control unit in the network
- Corrosion on electrical connections
- Short circuit or interruption in the data line
- Defective terminating resistors in the CAN bus system
- Power supply problems with the control units
- Electromagnetic interference from other components
What symptoms occur in parallel with error code U1900?
- Warning lights: Various indicator lights can light up simultaneously
- Functional failures: Certain electronic systems no longer function properly
- Communication problems: Diagnostic devices cannot reach all modules
- Intermittent faults: Sporadic failures of various vehicle functions
- ABS problems: Anti-lock braking system may be impaired
- Airbag warning light: Safety systems may report errors
- Engine irregularities: Loss of power or irregular engine running possible
How to fix the problem of error code U1900?
- Repairing this EOBD fault code requires a systematic diagnosis of the communication systems. The following solutions can solve the problem:
- Checking all CAN bus connections and plug connections for tight fit and corrosion, cleaning or replacing the affected components if necessary
- Measuring the CAN bus voltage and resistance values to identify defective terminating resistors or line interruptions
- Replacing damaged cable harnesses or repairing cable breaks in the CAN bus cabling
- Isolation and testing of individual control units to identify a defective module that is interfering with the overall communication
- Updating the software of all relevant control units to the latest version
- Checking and stabilizing the power supply of all modules connected to the CAN bus
FAQ - Frequently asked questions about DTC U1900
Can I continue driving with error code U1900?
Continuing to drive with code U1900 is not recommended, as important safety systems such as ABS or airbags may be affected. A prompt repair is required.
How much does it cost to repair trouble code U1900?
The repair costs for trouble code U1900 vary between 150-800 euros, depending on whether only plug connections need to be cleaned or complete control units need to be replaced.
Can fault code U1900 disappear by changing the battery?
A battery change can temporarily delete the fault code, but does not resolve the underlying communication fault. The fault is likely to recur.
What tools do I need to diagnose U1900?
To diagnose the DTC U1900, you need a professional OBD diagnostic device with CAN bus functionality and ideally a multimeter for voltage measurements.
Is the U1900 error code the same for all manufacturers?
No, U1900 is a manufacturer-specific code and can have different meanings for different brands. The exact definition depends on the vehicle manufacturer.
How long does it take to repair fault code U1900?
The repair time for EOBD code U1900 is typically 2-6 hours, depending on the complexity of the problem and the accessibility of the affected components.
How to change front wheel bearing on MERCEDES-BENZ M W163 TUTORIAL | AUTODOC
How to change fuel filter BMW 3 (E90) [TUTORIAL AUTODOC]
How to change Front wheel bearing on VW GOLF 4 TUTORIAL | AUTODOC
How to change a rear brake pads FORD FOCUS 3 TUTORIAL | AUTODOC
How to change pollen filter / cabin filter on AUDI A6 (C6) [TUTORIAL AUTODOC]
How to change engine thermostat on PEUGEOT 207 [TUTORIAL AUTODOC]
How to change fuel filter NISSAN X-TRAIL T30 TUTORIAL | AUTODOC
How to change front wheel bearing TOYOTA YARIS XP10 TUTORIAL | AUTODOC
Free download PDF
1.38 MB
Free download PDF
Free download PDF
Free download PDF
Free download PDF
Free download PDF
Ask on the forum
Engine Overheating? Replace Your Cooling Fan to Fix It
Top 4 Car Cleaning Products to Protect Your Car's Body | AUTODOC Tips
2 ways to clean the EGR valve – which one is better?
Save Money on Fuel with These Easy Tips | AUTODOC
