Error code P1745 is displayed and the check engine light is on - what does this mean?
The DTC P1745 is a manufacturer-specific fault code that is recognized by the OBD system and indicates problems with the transmission control unit. This trouble code typically refers to malfunctions in the electronic pressure control system of the automatic transmission. This fault code can have different meanings for different manufacturers, but usually relates to the transmission hydraulics or solenoid valves.
What causes can this fault code have?
- Defective solenoid valve in the transmission control unit
- Contaminated or clogged transmission oil
- Damaged wiring to the transmission control unit
- Loose or corroded plug connections
- Defective transmission oil pressure sensor
- Mechanical problems in the transmission hydraulics
- Faulty transmission control unit (TCM)
- Transmission oil level too low
What symptoms occur in parallel with fault code P1745?
- Shifting problems: The transmission shifts jerkily or with a delay between gears
- Emergency running program: The vehicle gets "stuck" in a gear and no longer shifts
- Loss of power: Reduced engine power and poor acceleration
- Irregular shifting behavior: Unpredictable gear changes or failure to shift gears
- Increased fuel consumption: Due to inefficient transmission control
- Vibrations: Noticeable vibrations while driving or shifting gears
How to fix the problem of error code P1745?
- Repairing the P1745 error code requires a systematic approach to identify the root cause.
- Change the transmission oil and filter completely, as contaminated oil is often the cause of solenoid valve problems
- Check the wiring and plug connections to the transmission control unit for damage, corrosion or loose contacts and repair them
- Replace transmission oil pressure sensor if pressure measurements are out of specification
- Identify and replace defective solenoid valves in the transmission control block
- Reprogram transmission control module (TCM) or replace if irreparably defective
- Clean or overhaul the transmission hydraulic block if there are mechanical blockages
FAQ - Frequently asked questions about DTC P1745
Can I continue driving with error code P1745?
Short distances are possible, but not recommended. The code P1745 can lead to unpredictable shifting problems that impair driving safety. A prompt repair is required.
How much does it cost to repair error code P1745?
The costs vary depending on the cause: transmission oil change 150-300€, solenoid valve replacement 300-800€, transmission control unit 800-1500€. A precise diagnosis is essential for estimating the costs.
How is error code P1745 diagnosed?
Diagnosis is carried out using an OBD scanner, followed by transmission oil pressure measurements, wiring checks and solenoid valve tests. Expert workshops use special transmission testers for precise measurements.
Is P1745 a serious fault code?
Yes, P1745 should be taken seriously as it affects transmission function. If left untreated, it can lead to costly transmission damage. A quick diagnosis and repair are important.
Can I repair error code P1745 myself?
Simple measures such as changing the oil are possible, but most repairs require specialist knowledge and tools. Transmission repairs should be carried out by qualified mechanics.
How do I prevent the recurrence of P1745?
Regular transmission oil changes according to manufacturer's instructions, careful driving and prompt repair of transmission problems will prevent EOBD code P1745. Use quality oil and filters.