Error code P1662 is displayed and the check engine light is on - what does this mean?
The DTC P1662 is a manufacturer-specific fault code that is recognized by the OBD system and typically indicates a problem with the fuel pump driver or the fuel pump control unit. This trouble code can have different meanings for different vehicle brands, but usually relates to the fuel system or the electrical control of the fuel pump.
What causes can this error code have?
- Defective fuel pump
- Damaged fuel pump relay
- Broken cable connections to the fuel pump driver
- Defective fuel pump driver in the control unit
- Corroded or loose plug connections
- Short circuit in the fuel pump wiring
- Defective fuel pressure sensor
- Problems with the power supply
What symptoms occur in parallel with fault code P1662?
- Starting problems: The vehicle is difficult or impossible to start
- Loss of power: Reduced engine power while driving
- Jerking: Engine runs out of round or stutters
- Smell of fuel: Smell of gasoline in or around the vehicle
- Stalling of the engine: Engine stalls while driving
- Poor acceleration: Delayed response when accelerating
How can the problem with error code P1662 be rectified?
- Repairing EOBD fault code P1662 requires a systematic diagnosis of the fuel system.
- Check fuel pump relay and replace if necessary - often the most cost-effective solution
- Check all electrical connections to the fuel pump for corrosion and tightness and clean them
- Test fuel pump for proper function and replace defective pump completely
- Measure the wiring of the fuel pump driver with a multimeter and repair damaged cables
- Check fuel pressure sensor and replace if malfunctioning
- Check the control unit software for updates and have it reprogrammed if necessary
FAQ - Frequently asked questions about DTC P1662
Can I continue driving with error code P1662?
Continuing to drive with code P1662 is not recommended, as problems with the fuel supply can lead to sudden engine failures. This poses a significant safety risk, especially at high speeds or in heavy traffic.
How much does it cost to repair fault code P1662?
The repair costs for fault code P1662 vary depending on the cause: Replacing a relay costs around 20-50 euros, while replacing a fuel pump can cost between 200-800 euros. Labor costs in the workshop are an additional 80-120 euros per hour.
Is fault code P1662 the same for all vehicle brands?
No, P1662 is a manufacturer-specific DTC and can have different meanings for different brands. With BMW, it often refers to the fuel pump control unit, while with other manufacturers it can affect other systems.
How can I delete error code P1662 myself?
The code P1662 can be deleted with an OBD scanner, but will return if the underlying problem has not been resolved. Permanent deletion is only possible by repairing the cause.
Can an empty tank trigger the error code P1662?
A very low fuel level can actually cause trouble code P1662, as the fuel pump then draws in air and overheats. Always refuel in good time and never let the tank run completely empty.
What tools do I need to diagnose P1662?
To diagnose EOBD code P1662, you need an OBD scanner, a multimeter for voltage measurement, a fuel pressure gauge and basic tools. More complex repairs should be carried out by a specialist workshop.