Error code C1132 is displayed and the check engine light is on - what does this mean?
The DTC C1132 is recognized by the OBD system and indicates a fault in the ABS system or the electronic stability control. This trouble code mainly affects the wheel speed sensors and their signal transmission. This EOBD fault code may have slightly different specifications for different manufacturers.
What causes can this fault code have?
- Defective wheel speed sensor
- Damaged sensor cable or plug connection
- Dirty or corroded sensor ring
- Defective ABS control unit
- Loose or damaged wiring
- Mechanical damage to the wheel bearing
- Faulty ground or power supply
What symptoms occur in parallel with fault code C1132?
- ABS warning light: The ABS indicator light lights up continuously
- ESP fault: The electronic stability control is deactivated
- Braking behavior: Extended braking distances during emergency braking
- Driving dynamics: More unstable driving behavior in critical situations
- Additional warning lights: Further indicator lights can be activated
How can the problem with fault code C1132 be rectified?
- Repairing fault code C1132 requires a systematic diagnosis of the affected components.
- Replacement of the defective wheel speed sensor after precise localization of the faulty sensor
- Repairing or replacing damaged cable connections between the sensor and control unit
- Cleaning the sensor ring to remove dirt, metal chips or corrosion
- Replacement of the ABS control unit in the event of an internal defect following professional diagnosis
- Checking and repairing the earth connections in the ABS system
- Replacement of the wheel bearing in the event of mechanical damage to the sensor ring
FAQ - Frequently asked questions about DTC C1132
Can I continue driving with error code C1132?
It is generally possible to continue driving, but ABS and ESP are not functioning. There is no acute danger during normal driving, but important safety systems are missing in emergency situations. A prompt repair is strongly recommended.
How much does it cost to repair error code C1132?
The repair costs vary depending on the cause: a wheel speed sensor costs between 50-150 euros, cable repairs 100-300 euros, while an ABS control unit can cost 500-1200 euros. The working time is usually 1-3 hours.
How can I delete the code C1132 myself?
The code can be deleted with an OBD diagnostic device, but will return if the cause has not been rectified. After a successful repair, the fault code disappears automatically after several driving cycles.
Is fault code C1132 relevant for the main inspection?
Yes, an active C1132 code leads to a complaint during the general inspection, as the functionality of the safety systems is not guaranteed. The repair must be carried out before the vehicle can be successfully inspected.
What tools do I need to diagnose C1132?
You will need an OBD diagnostic device, a multimeter for voltage measurement and possibly an oscilloscope. Professional workshops use special ABS diagnostic devices for more detailed analyses.
Can code C1132 be caused by weather conditions?
Yes, moisture, salt and extreme temperatures can damage sensors and cable connections. Corrosion on the sensor rings or plug connections in particular is a common weather-related cause.