Disclaimer
How to change wing mirror on FORD Focus Mk1 Box Body / Estate (DNW) – replacement guide
downloads:
4
Views:
151
Important!
This replacement procedure can be used for:
FORD Focus Mk1 Box Body / Estate (DNW) 1.8 TDDi, FORD Focus Mk1 Box Body / Estate (DNW) 1.4, FORD Focus Mk1 Box Body / Estate (DNW) 1.6, FORD Focus Mk1 Box Body / Estate (DNW) 1.8, FORD Focus Mk1 Box Body / Estate (DNW) 1.8 TDDi, FORD Focus Mk1 Box Body / Estate (DNW) 1.8 TDCi, FORD Focus Mk1 Box Body / Estate (DNW) 1.8 TDCi … View more
The steps may slightly vary depending on the car design.
FORD Focus Mk1 Box Body / Estate (DNW) 1.8 TDDi, FORD Focus Mk1 Box Body / Estate (DNW) 1.4, FORD Focus Mk1 Box Body / Estate (DNW) 1.6, FORD Focus Mk1 Box Body / Estate (DNW) 1.8, FORD Focus Mk1 Box Body / Estate (DNW) 1.8 TDDi, FORD Focus Mk1 Box Body / Estate (DNW) 1.8 TDCi, FORD Focus Mk1 Box Body / Estate (DNW) 1.8 TDCi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wing Mirror for Focus Mk1 Box Body / Estate (DNW) and other FORD models
Alternative products

WD-40 spray
Electronic spray
Torque wrench
Drive socket # 10
Ratchet wrench
Clip removal tool
Plastic trim tool
Fender cover
Replacement: wing mirror – FORD Focus Mk1 Kasten / Kombi (DNW). AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: wing mirror – FORD Focus Mk1 Kasten / Kombi (DNW). Recommended sequence of steps:
- Step 1Open the car door.Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car. - Step 3
Remove the wing mirror cover. Use a plastic trim tool. - Step 4
Disconnect the wiring of the wing mirror. Use a clip removal tool. - Step 5
Detach the mirror adjuster connector from the door. - Step 6
Remove the wing mirror screws. Use a drive socket #10. Use a ratchet wrench. - Step 7
Remove the wing mirror. - Step 8
Clean the wing mirror mounting seat. Use WD-40 spray. - Step 9
Install the new wing mirror. - Step 10
Tighten the screws of the wing mirror. Use a drive socket #10. Use a torque wrench. Tighten it to 8 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Focus Mk1 Box Body / Estate (DNW) model
Popular maintenance tutorials for FORD Focus Mk1 Kasten / Kombi (DNW)
Complete guides for changing the Side mirror on different FORD FOCUS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD Focus Mk1 Box Body / Estate (DNW)
View more
5 most common causes of oil leaks | AUTODOC tips
How to tell if a tie rod is faulty
#DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!
Regain Your Confidence on the Road: Easy Headlight Restoration Tips
Most commonly replaced car parts on FORD FOCUS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


















