How to change front anti roll bar links on VW Golf 6 – replacement guide
downloads:
8
Views:
185
0
Users voted – 0
Important!
This replacement procedure can be used for:
VW GOLF VI (5K1) 1.6 MultiFuel,
VW GOLF VI (5K1) 2.0 R 4motion,
VW GOLF VI (5K1) 1.2 TSI,
VW GOLF VI (5K1) 2.0 R 4motion,
VW GOLF VI (5K1) 2.0 GTi,
VW GOLF VI (5K1) 1.4,
VW GOLF VI (5K1) 1.6,
VW GOLF VI (5K1) 1.4 TSI,
VW GOLF VI (5K1) 1.4 TSI,
VW GOLF VI (5K1) 2.0 TDI,
VW GOLF VI (5K1) 2.0 TDI,
VW GOLF VI (5K1) 2.0 TDI,
VW GOLF VI (5K1) 1.6 BiFuel,
VW GOLF VI (5K1) 2.0 GTi,
VW GOLF VI (5K1) 1.6 TDI,
VW GOLF VI (5K1) 2.0 TDI 4motion,
VW GOLF VI (5K1) 2.0 TDI,
VW GOLF VI (5K1) 1.2 TSI,
VW GOLF VI (5K1) 2.0 R 4motion,
VW GOLF VI (5K1) 1.6 TDI,
VW GOLF VI (5K1) 1.8 TSI,
VW GOLF VI (5K1) Blue E-Motion,
VW GOLF VI (5K1) 2.5
…
View more
The steps may slightly vary depending on the car design.
How to change front anti roll bar link / front drop link on VW GOLF 6 (5K1) [TUTORIAL AUTODOC]
All the parts you need to replace – Anti Roll Bar Links for GOLF VI (5K1) and other VW models
Replace the stabiliser links on VW Golf 6 in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
All work should be done with the engine stopped.
Replacement: anti roll bar links – VW Golf 6. Recommended sequence of steps:
Step 1
Secure the wheels with chocks.
Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3
Raise the front of the car and secure on supports.
Step 4
Unscrew the wheel bolts.
AUTODOC recommends:
Important! Hold the wheel while unscrewing the fastening bolts. VW Golf 6
Step 5
Remove the wheel.
Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 7
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #18. Use XZN #6. Use a ratchet wrench.
Step 8
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 9
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use XZN #6. Use a ratchet wrench.
Step 10
Remove the stabilizer rod.
Step 11
Install a new rod, tighten the fasteners.
Step 12
Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use XZN #6. Use a torque wrench. Tighten it to 65 nm torque.
Step 13
Tighten the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #18. Use XZN #6. Use a torque wrench. Tighten it to 65 nm torque.
Step 14
Clean the wheel rim mounting seat. Use a wire brush. Treat the contacting surface. Use copper grease.
Step 15
Install the wheel.
AUTODOC recommends:
Warning! To avoid injury, hold the wheel while screwing in the fastening bolts on the car. VW Golf 6
Step 16
Screw in the wheel bolts. Use wheel impact socket #17.
Step 17
Lower the car and working in a cross order, tighten the wheel bolts. Use a torque wrench. Tighten it to 120 Nm torque.
Step 18
Remove the jacks and chocks.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the VW Golf VI Hatchback (5K1) model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your VW GOLF VI (5K1)
View more
How to polish an old engine valve cover to a shiny finish | AUTODOC Tips
How to prevent car windows from fogging up | AUTODOC tips