Disclaimer
How to change track rod end on TOYOTA Echo Saloon (_P1_) – replacement guide
downloads:
0
Views:
33
Important!
This replacement procedure can be used for:
TOYOTA Echo Saloon (_P1_) 1.5 (NCP12_) … View more
The steps may slightly vary depending on the car design.
TOYOTA Echo Saloon (_P1_) 1.5 (NCP12_) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Track Rod End for Echo Saloon (_P1_) and other TOYOTA models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 19
Drive socket # 22
Combination spanner #19
Wheel impact socket #21
Ratchet wrench
Torque wrench
Ball joint puller
Vernier caliper
Nippers
Wheel chock
Replacement: track rod end – TOYOTA Echo Limousine (_P1_). AUTODOC recommends:
- Replace tie rod ends in pairs.
- The replacement procedure is identical for the right and left tie rod ends.
- All work should be done with the engine stopped.
Replacement: track rod end – TOYOTA Echo Limousine (_P1_). Take the following steps:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #21. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: track rod end – TOYOTA Echo Limousine (_P1_). Professionals recommend:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. - Step 7
Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #19. - Step 8Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.Step 9
Unscrew the end fastening nut to the steering knuckle. Use a drive socket #22. Use a ratchet wrench. - Step 10
Disconnect the tie rod end from the steering knuckle. Use a ball joint puller. - Step 11
Screw the end out of the tie rod. - Step 12Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.Step 13
Screw on a new tie rod end.Replacement: track rod end – TOYOTA Echo Limousine (_P1_). Tip from AUTODOC:While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements. - Step 14
Connect the tie rod end to the steering knuckle.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Echo Saloon (_P1_) model
Popular maintenance tutorials for TOYOTA Echo Limousine (_P1_)
Complete guides for changing the Tie rod end on different TOYOTA ECHO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA Echo Saloon (_P1_)
View more
Easy Steps to Paint Brake Calipers Without Special Skills or High Costs
CHECK ENGINE light turned on – step-by-step guide on what to do
Understanding Airbag Light Warnings | Essential Tips for Car Safety
DIY engine block coffee table
Most commonly replaced car parts on TOYOTA ECHO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


























