How to carry out replacement: Track Rod End 1.6 (ZRE181_) Toyota Corolla NRE180
Disclaimer
Change Toyota Corolla NRE180 1.6 CNG (ZRE171) Track Rod End yourself – manuals and video tutorials

How to change track rod end on TOYOTA Corolla XI Saloon (E180) – replacement guide

downloads: 4
Views: 27
Download your free tutorial and fix TOYOTA Corolla Saloon (_E18_, ZRE1_) 1.6 VVTi (ZRE171_) problems yourself Download for free 1.76 MB Track Rod End for Toyota Corolla NRE180 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
TOYOTA Corolla Saloon (_E18_, ZRE1_) 1.6 (ZRE171_, ZRE181_), TOYOTA Corolla Saloon (_E18_, ZRE1_) 1.8 VVTi (ZRE172, ZRE182), TOYOTA Corolla Saloon (_E18_, ZRE1_) 1.6 (ZRE181_), TOYOTA Corolla Saloon (_E18_, ZRE1_) 1.4 D-4D (NDE180_, NDE170_), TOYOTA Corolla Saloon (_E18_, ZRE1_) 1.3 (NRE180_) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for Corolla Saloon (_E18_, ZRE1_) and other TOYOTA models
Alternative products
How to change Track rod end on Toyota Corolla NRE180 1.6 (ZRE181_) – step-by-step instructions for straightforward car repair Track rod end
Tools
Replacement: track rod end – TOYOTA COROLLA Saloon (NRE18_, ZRE17_, ZRE18_, NDE18_). Tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #15
Combination spanner #19
Drive socket # 17
Drive socket # 19
Wheel impact socket #21
Torque wrench
Tap wrench
Nippers
Vernier caliper
Crow bar
Ball joint puller
Wheel chock
Buy tools
Replacement: track rod end – TOYOTA COROLLA Saloon (NRE18_, ZRE17_, ZRE18_, NDE18_). AUTODOC recommends:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Replacement: track rod end – TOYOTA COROLLA Saloon (NRE18_, ZRE17_, ZRE18_, NDE18_). Recommended sequence of steps:
  1. Step 1
    How to change Track Rod End on Toyota Corolla NRE180 2013 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace TOYOTA Corolla Saloon (_E18_, ZRE1_) 1.6 (ZRE181_) 2014 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #21.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Toyota Corolla NRE180 1.4 D-4D (NDE180_, NDE170_) 2015 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: track rod end – TOYOTA COROLLA Saloon (NRE18_, ZRE17_, ZRE18_, NDE18_). Tip from AUTODOC:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Track Rod End on TOYOTA Corolla Saloon (_E18_, ZRE1_) 1.8 VVTi (ZRE172, ZRE182) 2016 by yourself
    Remove the wheel.
  5. Step 6
    How to remove TOYOTA COROLLA 1.8 VVTi (ZRE170) 2017 Track Rod End - online easy-to-follow instructions
    Remove the cotter pin. Use a crowbar. Use nippers.
  6. Step 7
    How to replace Track Rod End on TOYOTA Corolla Saloon (_E18_, ZRE1_) 2018: download PDF manuals and video instructions
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on Toyota Corolla NRE180 1.8 VVTi (ZRE172) 2019 - download illustrated guide
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #17. Use a tap wrench.
  8. Step 9
    Need to know how to renew Track Rod End on TOYOTA COROLLA 2013? This free workshop manual will help you to do it yourself
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  9. Step 10
    Changing of Track Rod End on Toyota Corolla NRE180 2014 won't be an issue if you follow this illustrated step-by-step guide
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #19.
  10. Step 11
    TOYOTA COROLLA 1.6 CNG (ZRE171) Track Rod End replacement: online guides and video tutorials
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  11. Step 12
    Replacing Track Rod End on Toyota Corolla NRE180 2016 1.6 (ZRE181_) by yourself
    Screw the end out of the tie rod.
  12. Step 13
    Corolla Saloon (_E18_, ZRE1_) 1.8 VVTi (ZRE170) 2017 Track Rod End DIY replacement workshop manual
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  13. Step 14
    How to change Track Rod End on TOYOTA Corolla Saloon (_E18_, ZRE1_) 2018 - tips and tricks
    Screw on a new tie rod end. Use a combination spanner #19.
    Replacement: track rod end – TOYOTA COROLLA Saloon (NRE18_, ZRE17_, ZRE18_, NDE18_). Tip from AUTODOC experts:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  14. Step 15
    Step-by-step recommendations for DIY replacement Toyota Corolla NRE180 2019 1.8 VVTi (ZRE170) Track Rod End
    Screw on the tie rod end jam nut. Use a combination spanner #19.
  15. Step 16
    DIY replacement of Track Rod End on TOYOTA Corolla Saloon (_E18_, ZRE1_) 1.3 (NRE180_) 2013 is not an issue anymore with our step-by-step tutorial
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the TOYOTA Corolla XI Saloon (E180) model

Toyota Corolla NRE180 tyre size

Popular maintenance tutorials for Toyota Corolla NRE180

More manuals for Toyota Corolla NRE180

Complete guides for changing the Tie rod end on different TOYOTA COROLLA models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY TOYOTA Corolla Saloon (_E18_, ZRE1_) Track Rod End replacement - online guide
Tips & tricks for your TOYOTA Corolla Saloon (_E18_, ZRE1_)
View more
  • How to change Tie rod end on TOYOTA Corolla Saloon (_E18_, ZRE1_) 1.3 (NRE180_) - replacement tricks
    Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips
    8K views
    Published on: 16/12/2021
  • Changing Outer tie rod Toyota Corolla NRE180 1.6 (ZRE181_) - Replacement Tips
    What to do if your check engine light is on | AUTODOC tips
    19K views
    Published on: 19/08/2020
  • Maintenance Hacks - TOYOTA Corolla Saloon (_E18_, ZRE1_) 1.4 D-4D (NDE180_, NDE170_) Track rod end ball joint replacement guide
    How to unlock your car without a key | AUTODOC tips
    2M views
    Published on: 15/09/2022
  • Replace Outer tie rod end on Toyota Corolla NRE180 - free video tips
    How to Install a New Windscreen Yourself | AUTODOC Expert Tips
    10K views
    Published on: 06/06/2024

Most commonly replaced car parts on TOYOTA COROLLA

Professional manuals for the most common TOYOTA models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
TOYOTA Corolla Saloon (_E18_, ZRE1_) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME