Disclaimer
How to change front anti roll bar links on TOYOTA Corolla Saloon (_E18_, ZRE1_) – replacement guide
downloads:
0
Views:
9
Important!
This replacement procedure can be used for:
TOYOTA Corolla Saloon (_E18_, ZRE1_) 1.3 (NRE180_), TOYOTA Corolla Saloon (_E18_, ZRE1_) 1.4 D-4D (NDE180_, NDE170_), TOYOTA Corolla Saloon (_E18_, ZRE1_) 1.6 (ZRE181_), TOYOTA Corolla Saloon (_E18_, ZRE1_) 1.8 VVTi (ZRE172, ZRE182), TOYOTA Corolla Saloon (_E18_, ZRE1_) 1.4 D-4D (NDE180) … View more
The steps may slightly vary depending on the car design.
TOYOTA Corolla Saloon (_E18_, ZRE1_) 1.3 (NRE180_), TOYOTA Corolla Saloon (_E18_, ZRE1_) 1.4 D-4D (NDE180_, NDE170_), TOYOTA Corolla Saloon (_E18_, ZRE1_) 1.6 (ZRE181_), TOYOTA Corolla Saloon (_E18_, ZRE1_) 1.8 VVTi (ZRE172, ZRE182), TOYOTA Corolla Saloon (_E18_, ZRE1_) 1.4 D-4D (NDE180) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Corolla Saloon (_E18_, ZRE1_) and other TOYOTA models
Anti-roll bar link
Anti-roll bar link
Wire brush
WD-40 spray
Copper grease
Drive socket # 17
Wheel impact socket #21
Torque wrench
Tap wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on TOYOTA COROLLA Saloon (NRE18_, ZRE17_, ZRE18_, NDE18_) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – TOYOTA COROLLA Saloon (NRE18_, ZRE17_, ZRE18_, NDE18_). Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #21. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. TOYOTA COROLLA Saloon (NRE18_, ZRE17_, ZRE18_, NDE18_) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a tap wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a tap wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – TOYOTA COROLLA Saloon (NRE18_, ZRE17_, ZRE18_, NDE18_). AUTODOC experts recommend:Examine stabiliser bushes. Replace them if needed. - Step 10
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Corolla XI Saloon (E180) model.
Popular maintenance tutorials for Toyota Corolla NRE180
Free download PDF
2.58 MB
Free download PDF2.23 MB
Free download PDF1.76 MB
Free download PDF1.56 MB
Free download PDF1.41 MB
Free download PDF1.75 MB
Complete guides for changing the Drop links on different TOYOTA COROLLA models
Free download PDF1.25 MB
Free download PDF1.25 MB
Free download PDF1.25 MB
Free download PDF1.25 MB
Free download PDF1.27 MB
Free download PDF1.25 MB
Your profile is your personal assistant.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- - scan the QR code
- - download from App Store
- - download from Google Play
Tips & tricks for your TOYOTA Corolla Saloon (_E18_, ZRE1_)
View more
DIY valve cover restoration | AUTODOC tips
5 most common causes of oil leaks | AUTODOC tips
What to do if the belt squeals | AUTODOC tips
Causes of a worn car boot damper | AUTODOC
