Disclaimer
How to change track rod end on SKODA Octavia I Box Body / Estate (1U5) – replacement guide
downloads:
2
Views:
39
Important!
This replacement procedure can be used for:
SKODA Octavia I Box Body / Estate (1U5) 1.9 D, SKODA Octavia I Box Body / Estate (1U5) 1.9 TDI … View more
The steps may slightly vary depending on the car design.
SKODA Octavia I Box Body / Estate (1U5) 1.9 D, SKODA Octavia I Box Body / Estate (1U5) 1.9 TDI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Track Rod End for Octavia I Box Body / Estate (1U5) and other SKODA models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
High-temperature ceramic grease
Torque wrench
Combination spanner #21
Drive socket # 19
Wheel impact socket #17
Ratchet wrench
Ball joint puller
Vernier caliper
Wheel chock
Replacement: track rod end – SKODA Octavia I Kasten / Kombi (1U5). AUTODOC experts recommend:
- Replace tie rod ends in pairs.
- The replacement procedure is identical for the right and left tie rod ends.
- Please note: all work on the car – SKODA Octavia I Kasten / Kombi (1U5) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. SKODA Octavia I Kasten / Kombi (1U5) - Step 5
Remove the wheel. - Step 6
When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper. - Step 7Clean the lock nut that connects the tie rod to the tie rod end. Use a wire brush. Use WD-40 spray.Step 8
Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #21. - Step 9
Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray. - Step 10
Unscrew the end fastening nut to the steering knuckle. Use a drive socket #19. Use a ratchet wrench. - Step 11
Disconnect the tie rod end from the steering knuckle. Use a ball joint puller. - Step 12
Screw the end out of the tie rod. - Step 13
Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray. - Step 14
Screw on a new tie rod end.Replacement: track rod end – SKODA Octavia I Kasten / Kombi (1U5). Tip from AUTODOC experts:While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SKODA Octavia I Box Body / Estate (1U5) model
Popular maintenance tutorials for SKODA Octavia I Kasten / Kombi (1U5)
Complete guides for changing the Tie rod end on different SKODA OCTAVIA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SKODA Octavia I Box Body / Estate (1U5)
View more
What to do if the ABS light comes on: DIY Diagnostics Tips
Reviving Your Car: How to Start After Extended Idle Time | AUTODOC Tips
Save Money on Fuel with These Easy Tips | AUTODOC
Checking the starter without removing it | AUTODOC tips
Most commonly replaced car parts on SKODA OCTAVIA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





























