How to carry out replacement: Track Rod End 1.5 TSI SKODA Octavia IV Limousine (NX3)
Disclaimer
Change SKODA Octavia IV Limousine (NX3) 1.0 TSI e-TEC Track Rod End yourself – manuals and video tutorials

How to change track rod end on SKODA Octavia IV Saloon (NX3) – replacement guide

downloads: 6
Views: 30
Download your free tutorial and fix SKODA Octavia IV Saloon (NX3) 1.5 TSI G-TEC problems yourself Download for free 1.62 MB Track Rod End for SKODA Octavia IV Limousine (NX3) Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
SKODA Octavia IV Saloon (NX3) 1.5 TSI, SKODA Octavia IV Saloon (NX3) 2.0 TDi, SKODA Octavia IV Saloon (NX3) 2.0 TDi, SKODA Octavia IV Saloon (NX3) 1.0 TSI, SKODA Octavia IV Saloon (NX3) 2.0 TDI, SKODA Octavia IV Saloon (NX3) 2.0 TSI RS, SKODA Octavia IV Saloon (NX3) 1.4 TSI RS iV, SKODA Octavia IV Saloon (NX3) 1.5 TSI G-TEC, SKODA Octavia IV Saloon (NX3) 1.0 TSI e-TEC, SKODA Octavia IV Saloon (NX3) 1.6 SRE, SKODA Octavia IV Saloon (NX3) 2.0 TDI RS 4x4, SKODA Octavia IV Saloon (NX3) 2.0 TDI RS, SKODA Octavia IV Saloon (NX3) 1.5 TSI e-TEC, SKODA Octavia IV Saloon (NX3) 2.0 TDI 4x4, SKODA Octavia IV Saloon (NX3) 2.0 TSI 4x4, SKODA Octavia IV Saloon (NX3) 1.4 TSI … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for Octavia IV Saloon (NX3) and other SKODA models
Alternative products
How to change Track rod end on SKODA Octavia IV Limousine (NX3) 1.5 TSI – step-by-step instructions for straightforward car repair Track rod end
Tools
Replacement: track rod end – SKODA Octavia IV Limousine (NX3). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #22
Combination spanner #24
Drive socket # 18
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Vernier caliper
Ball joint puller
Wheel chock
Buy tools
Replacement: track rod end – SKODA Octavia IV Limousine (NX3). Tip from AUTODOC experts:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Replacement: track rod end – SKODA Octavia IV Limousine (NX3). Recommended sequence of steps:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Track Rod End on SKODA Octavia IV Limousine (NX3) 2020 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    How to replace SKODA Octavia IV Saloon (NX3) 1.5 TSI 2021 Track Rod End - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    Replacement: track rod end – SKODA Octavia IV Limousine (NX3). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  3. Step 5
    SKODA Octavia IV Limousine (NX3) 2.0 TDi 2022 Track Rod End replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Track Rod End on SKODA Octavia IV Saloon (NX3) 2.0 TDI 2023 by yourself
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove SKODA OCTAVIA 2.0 TSI 2024 Track Rod End - online easy-to-follow instructions
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  6. Step 8
    How to replace Track Rod End on SKODA Octavia IV Saloon (NX3) 2025: download PDF manuals and video instructions
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #24.
  7. Step 9
    How hard is it to do yourself: Track Rod End replacement on SKODA Octavia IV Limousine (NX3) 1.4 TSI RS iV 2020 - download illustrated guide
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #18. Use a tap wrench.
  8. Step 10
    Need to know how to renew Track Rod End on SKODA OCTAVIA 2021? This free workshop manual will help you to do it yourself
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  9. Step 11
    Changing of Track Rod End on SKODA Octavia IV Limousine (NX3) 2022 won't be an issue if you follow this illustrated step-by-step guide
    Screw the end out of the tie rod.
  10. Step 12
    SKODA OCTAVIA 1.0 TSI e-TEC Track Rod End replacement: online guides and video tutorials
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  11. Step 13
    Replacing Track Rod End on SKODA Octavia IV Limousine (NX3) 2024 1.5 TSI by yourself
    Screw on a new tie rod end.
    AUTODOC recommends:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  12. Step 14
    Octavia IV Saloon (NX3) 2.0 TSI 2025 Track Rod End DIY replacement workshop manual
    Connect the tie rod end to the steering knuckle.
  13. Step 15
    How to change Track Rod End on SKODA Octavia IV Saloon (NX3) 2020 - tips and tricks
    Screw on the fastening nut that connects the tie rod end to the steering knuckle. Use a drive socket #18. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SKODA Octavia IV Saloon (NX3) model

SKODA Octavia IV Limousine (NX3) tyre size

Popular maintenance tutorials for SKODA Octavia IV Limousine (NX3)

More manuals for SKODA Octavia IV Limousine (NX3)

Complete guides for changing the Tie rod end on different SKODA OCTAVIA models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY SKODA Octavia IV Saloon (NX3) Track Rod End replacement - online guide
Tips & tricks for your SKODA Octavia IV Saloon (NX3)
View more
  • How to change Tie rod end on SKODA Octavia IV Saloon (NX3) 1.0 TSI - replacement tricks
    #TPMS Explained: Why Your Light is On and How to Respond Safely
    8K views
    Published on: 28/09/2023
  • Changing Outer tie rod SKODA Octavia IV Limousine (NX3) 1.5 TSI - Replacement Tips
    How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
    2K views
    Published on: 15/02/2021
  • Maintenance Hacks - SKODA Octavia IV Saloon (NX3) 2.0 TDi Track rod end ball joint replacement guide
    Revive Your Tyres: Expert Tips for a Lasting Shine | AUTODOC Guide
    4K views
    Published on: 07/04/2022
  • Replace Outer tie rod end on SKODA Octavia IV Limousine (NX3) - free video tips
    Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips
    8K views
    Published on: 16/12/2021

Most commonly replaced car parts on SKODA OCTAVIA

Professional manuals for the most common SKODA models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
SKODA Octavia IV Saloon (NX3) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME