Disclaimer
How to change front lower arm on SKODA Octavia I Box Body / Estate (1U5) – replacement guide
downloads:
1
Views:
14
Important!
This replacement procedure can be used for:
SKODA Octavia I Box Body / Estate (1U5) 1.9 D, SKODA Octavia I Box Body / Estate (1U5) 1.9 TDI … View more
The steps may slightly vary depending on the car design.
SKODA Octavia I Box Body / Estate (1U5) 1.9 D, SKODA Octavia I Box Body / Estate (1U5) 1.9 TDI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Control Arm for Octavia I Box Body / Estate (1U5) and other SKODA models
Alternative products

Combination spanner #18
Drive socket # 16
Drive socket # 18
HEX bit No.H8.
WD-40 spray
Copper grease
Wire brush
Torque wrench
Wheel impact socket #17
Hydraulic transmission jack
Crow bar
Wheel chock
Replacement: front lower arm – SKODA Octavia I Kasten / Kombi (1U5). Tip from AUTODOC experts:
- The replacement procedure is identical for the left and right lower control arms.
- All work should be done with the engine stopped.
Replacement: front lower arm – SKODA Octavia I Kasten / Kombi (1U5). Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3
Raise the front of the car and secure on supports. - Step 4
Unscrew the wheel bolts.Replacement: front lower arm – SKODA Octavia I Kasten / Kombi (1U5). AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Disconnect the transverse stabilizer fastener from the link. Use a drive socket #16. Use HEX No.H8. - Step 7
Turn the stabilizer. - Step 8
Unscrew the ball joint fastening nut. Use a combination spanner #18. - Step 9
Unscrew the front arm fastener. Use a drive socket #16. - Step 10
Unscrew the rear arm fastener. Use a drive socket #18. - Step 11
Unscrew the ball joint fastening to the steering knuckle. - Step 12
Remove the arm.Replacement: front lower arm – SKODA Octavia I Kasten / Kombi (1U5). Professionals recommend:If necessary, use a crowbar. - Step 13
Clean all joints of the arm. Use a wire brush. Treat all joints of the arm. Use WD-40 spray.Replacement: front lower arm – SKODA Octavia I Kasten / Kombi (1U5). Tip from AUTODOC:Wear protective goggles. - Step 14
Install a new arm. - Step 15
Insert the ball joint into the steering knuckle and fix it with a new nut.Replacement: front lower arm – SKODA Octavia I Kasten / Kombi (1U5). AUTODOC experts recommend:Do not damage the ball joint cover. - Step 16
Install the front fastener of the arm. Do not tighten it.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SKODA Octavia I Box Body / Estate (1U5) model
Popular maintenance tutorials for SKODA Octavia I Kasten / Kombi (1U5)
Complete guides for changing the Control arm on different SKODA OCTAVIA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SKODA Octavia I Box Body / Estate (1U5)
View more
Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips
Top 7 signs of a bad starter
Checking the starter without removing it | AUTODOC tips
Transform Your Car's Look: 6 Simple Accessories You Need to Try!
Most commonly replaced car parts on SKODA OCTAVIA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
































