Important!
This replacement procedure can be used for:
SKODA OCTAVIA (1Z3) 1.6 LPG, SKODA OCTAVIA (1Z3) 1.8 TSI, SKODA OCTAVIA (1Z3) 2.0 TDI, SKODA OCTAVIA (1Z3) 1.9 TDI, SKODA OCTAVIA (1Z3) 2.0 TDI 16V, SKODA OCTAVIA (1Z3) 1.4, SKODA OCTAVIA (1Z3) 1.6, SKODA OCTAVIA (1Z3) 1.6 FSI, SKODA OCTAVIA (1Z3) 2.0 FSI, SKODA OCTAVIA (1Z3) 2.0 TFSI, SKODA OCTAVIA (1Z3) 1.4, SKODA OCTAVIA (1Z3) 2.0 TDI, SKODA OCTAVIA (1Z3) 2.0 TDI RS, SKODA OCTAVIA (1Z3) 1.8 TSI, SKODA OCTAVIA (1Z3) 2.0 TDI, SKODA OCTAVIA (1Z3) 1.6 MultiFuel, SKODA OCTAVIA (1Z3) 1.6 TDI, SKODA OCTAVIA (1Z3) 1.4 TSI, SKODA OCTAVIA (1Z3) 1.2 TSI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for OCTAVIA (1Z3) and other SKODA models
Tools
Replacement: track rod end – SKODA OCTAVIA (1Z3). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #23
Combination spanner #24
Drive socket # 18
Drive socket # 19
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Vernier caliper
Ball joint puller
Wheel chock
Replacement: track rod end – SKODA OCTAVIA (1Z3). AUTODOC recommends:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Replacement: track rod end – SKODA OCTAVIA (1Z3). Take the following steps:
  1. Step 1
    How to change Track Rod End on Skoda Octavia Mk2 2004 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace SKODA OCTAVIA (1Z3) 1.9 TDI 2005 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Skoda Octavia Mk2 1.6 2006 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: track rod end – SKODA OCTAVIA (1Z3). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Track Rod End on SKODA OCTAVIA (1Z3) 2.0 TDI 16V 2007 by yourself
    Remove the wheel.
  5. Step 6
    How to remove SKODA OCTAVIA 1.6 FSI 2008 Track Rod End - online easy-to-follow instructions
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Track Rod End on SKODA OCTAVIA (1Z3) 2009: download PDF manuals and video instructions
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #18. Use a tap wrench.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on Skoda Octavia Mk2 2.0 TDI RS 2010 - download illustrated guide
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  8. Step 9
    Need to know how to renew Track Rod End on SKODA OCTAVIA 2011? This free workshop manual will help you to do it yourself
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #23. Use a combination spanner #24.
  9. Step 10
    Changing of Track Rod End on Skoda Octavia Mk2 2012 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  10. Step 11
    SKODA OCTAVIA 2.0 FSI Track Rod End replacement: online guides and video tutorials
    Screw the end out of the tie rod.
  11. Step 12
    Replacing Track Rod End on Skoda Octavia Mk2 2004 1.9 TDI by yourself
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  12. Step 13
    OCTAVIA (1Z3) 1.6 FSI 2005 Track Rod End DIY replacement workshop manual
    Screw on a new tie rod end.
    Replacement: track rod end – SKODA OCTAVIA (1Z3). AUTODOC experts recommend:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  13. Step 14
    How to change Track Rod End on SKODA OCTAVIA (1Z3) 2006 - tips and tricks
    Connect the tie rod end to the steering knuckle.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the SKODA Octavia II Hatchback (1Z3) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
SKODA OCTAVIA (1Z3) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY SKODA OCTAVIA (1Z3) Track Rod End replacement - online guide
Tips & tricks for your SKODA OCTAVIA (1Z3)
View more
  • How to change Tie rod end on SKODA OCTAVIA (1Z3) 1.6 TDI - replacement tricks
    The most common problems when buying a used car | AUTODOC
  • Changing Outer tie rod Skoda Octavia Mk2 1.9 TDI - Replacement Tips
    Top 5 mistakes when buying car parts
  • Maintenance Hacks - SKODA OCTAVIA (1Z3) 1.6 Track rod end ball joint replacement guide
    What to do if the ABS light comes on | AUTODOC tips
  • Replace Outer tie rod end on Skoda Octavia Mk2 - free video tips
    What to do if the airbag light is on | AUTODOC tips