How to carry out replacement: Track Rod End 1.6 VTi PEUGEOT 301
Disclaimer
Change PEUGEOT 301 1.2 VTi Track Rod End yourself – manuals and video tutorials

How to change track rod end on PEUGEOT 301 Saloon – replacement guide

downloads: 8
Views: 46
Download your free tutorial and fix PEUGEOT 301 1.6 VTi problems yourself Download for free 1.44 MB Track Rod End for PEUGEOT 301 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
PEUGEOT 301 1.2 VTi, PEUGEOT 301 1.6 VTi, PEUGEOT 301 1.6 HDI, PEUGEOT 301 1.6 BlueHDi, PEUGEOT 301 1.2 VTi, PEUGEOT 301 1.5 BlueHDI, PEUGEOT 301 1.6 LPG, PEUGEOT 301 1.2 PureTech … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for 301 and other PEUGEOT models
Alternative products
How to change Track rod end on PEUGEOT 301 1.6 VTi – step-by-step instructions for straightforward car repair Track rod end
Tools
Replacement: track rod end – PEUGEOT 301. Tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Drive socket # 16
Drive socket # 17
Combination spanner #24
Combination spanner #25
Wheel impact socket #17
Ratchet wrench
Tap wrench
Vernier caliper
Ball joint puller
Wheel chock
Buy tools
Replacement: track rod end – PEUGEOT 301. AUTODOC recommends:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Replacement: track rod end – PEUGEOT 301. Take the following steps:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Track Rod End on PEUGEOT 301 2012 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    How to replace PEUGEOT 301 1.6 VTi 2013 Track Rod End - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. PEUGEOT 301
  3. Step 5
    PEUGEOT 301 1.2 VTi 2014 Track Rod End replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Track Rod End on PEUGEOT 301 1.6 BlueHDi 2015 by yourself
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove PEUGEOT 301 1.5 BlueHDI 2016 Track Rod End - online easy-to-follow instructions
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  6. Step 8
    How to replace Track Rod End on PEUGEOT 301 2017: download PDF manuals and video instructions
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #24 (2 pieces).
  7. Step 9
    How hard is it to do yourself: Track Rod End replacement on PEUGEOT 301 1.2 PureTech 2018 - download illustrated guide
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #16. Use a tap wrench.
  8. Step 10
    Need to know how to renew Track Rod End on PEUGEOT 301 2019? This free workshop manual will help you to do it yourself
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  9. Step 11
    Changing of Track Rod End on PEUGEOT 301 2020 won't be an issue if you follow this illustrated step-by-step guide
    Screw the end out of the tie rod.
  10. Step 12
    PEUGEOT 301 1.2 VTi Track Rod End replacement: online guides and video tutorials
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  11. Step 13
    Replacing Track Rod End on PEUGEOT 301 2022 1.6 VTi by yourself
    Screw on a new tie rod end.
    Replacement: track rod end – PEUGEOT 301. Tip from AUTODOC experts:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  12. Step 14
    301 1.5 BlueHDI 2023 Track Rod End DIY replacement workshop manual
    Connect the tie rod end to the steering knuckle.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 301 Saloon model

PEUGEOT 301 tyre size

Popular maintenance tutorials for PEUGEOT 301

More manuals for PEUGEOT 301

Complete guides for changing the Tie rod end on different PEUGEOT 301 models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY PEUGEOT 301 Track Rod End replacement - online guide
Tips & tricks for your PEUGEOT 301
View more
  • How to change Tie rod end on PEUGEOT 301 1.6 HDI - replacement tricks
    DIY starter repair | AUTODOC tips
    157K views
    Published on: 31/08/2023
  • Changing Outer tie rod PEUGEOT 301 1.6 VTi - Replacement Tips
    5 reasons why your car is making a knocking sound
    11K views
    Published on: 05/06/2025
  • Maintenance Hacks - PEUGEOT 301 1.2 VTi Track rod end ball joint replacement guide
    5 Ways You’re Scrubbing Your Car Wrong | AUTODOC Tips
    5K views
    Published on: 23/09/2021
  • Replace Outer tie rod end on PEUGEOT 301 - free video tips
    TOP 5 mistakes during DIY oil change | AUTODOC tips
    37K views
    Published on: 17/06/2021

Most commonly replaced car parts on PEUGEOT 301

Professional manuals for the most common PEUGEOT models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
PEUGEOT 301 Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME