How to carry out replacement: Oil Filter 1.3 i-V TEC City GM
Disclaimer
Change City GM 1.3 i-V TEC Oil Filter yourself – manuals and video tutorials

How to change engine oil and filter on HONDA City Saloon (GM2, GM3) – replacement guide

downloads: 15
Views: 79
Download your free tutorial and fix HONDA CITY Saloon (GM) 1.5 Flex problems yourself Download for free 1.09 MB Oil Filter for City GM Shop now
Leave a comment Open in a new tab
When to replace the Oil Filter on your HONDA CITY
Recommended replacement interval for the part category Oil filter : 12 month / 15000 km
Important!
This replacement procedure can be used for:
HONDA CITY Saloon (GM) 1.5 Flex, HONDA CITY Saloon (GM) 1.5 i-VTEC, HONDA CITY Saloon (GM) 1.5 i-VTEC (GM2), HONDA CITY Saloon (GM) 1.3 i-V TEC … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Oil Filter for CITY Saloon (GM) and other HONDA models
Alternative products
How to change Oil filter on City GM 1.3 i-V TEC – step-by-step instructions for straightforward car repair Oil filter
Tools
Replacement: engine oil and filter – HONDA CITY Saloon (GM). List of the tools you'll need:
Wire brush
All-purpose cleaning spray
Torque wrench
Drive socket # 17
Oil filter cup socket 65/14-F
Ratchet wrench
Funnel
Oil drain pan
Buy tools
Replacement: engine oil and filter – HONDA CITY Saloon (GM). AUTODOC recommends:
  • Replace the oil filter every time when changing motor oil.
  • Wear gloves to prevent contact with hot liquid.
  • Use only new O-rings during installation.
  • Please note: all work on the car – HONDA CITY Saloon (GM) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Lift the car using a jack or place it over an inspection pit.
    Replacement: engine oil and filter – HONDA CITY Saloon (GM). AUTODOC experts recommend:
    The vehicle must be on even keel, and if it is at an angle, the drain plug must be at the lowest point.Unscrew the oil filler plug.
    Step 2
    How to change Oil Filter on City GM 2008 - free PDF and video manuals
    Put a waste oil container with at least 4 l capacity under the drainage hole.
  2. Step 3
    How to replace HONDA CITY Saloon (GM) 1.3 i-V TEC 2009 Oil Filter - step-by-step manuals and video guides
    Clean the area of the oil pan drainage hole. Use a wire brush. Use all-purpose cleaning spray.
  3. Step 4
    City GM 1.5 i-VTEC 2010 Oil Filter replacement: free workshop manuals
    Unscrew the drain plug. Use a drive socket #17. Use a ratchet wrench.
  4. Step 5
    Changing Oil Filter on HONDA CITY Saloon (GM) 1.5 Flex 2011 by yourself
    Drain the used oil.
    AUTODOC recommends:
    Caution! The oil may be hot.Wait until the oil has completely drained from the drainage hole.
  5. Step 6
    How to remove HONDA CITY 1.3 i-V TEC 2012 Oil Filter - online easy-to-follow instructions
    Clean the area of the oil pan drainage hole.
  6. Step 7
    How to replace Oil Filter on HONDA CITY Saloon (GM) 2013: download PDF manuals and video instructions
    Screw in the new drainage plug and tighten it. Use a drive socket #17. Use a torque wrench. Tighten it to 39 nm torque.
  7. Step 8
    How hard is it to do yourself: Oil Filter replacement on City GM 1.5 i-VTEC (GM2) 2014 - download illustrated guide
    Clean the area of the oil pan drainage hole. Use all-purpose cleaning spray.
  8. Step 9
    Need to know how to renew Oil Filter on HONDA CITY 2015? This free workshop manual will help you to do it yourself
    Unscrew the oil filter. Use the 65/14-F socket. Use a ratchet wrench.
  9. Step 10
    Put the old oil filter in the container.
    Step 11
    Changing of Oil Filter on City GM 2016 won't be an issue if you follow this illustrated step-by-step guide
    Clean the oil filter seat. Use all-purpose cleaning spray.
  10. Step 12
    HONDA CITY 1.3 i-V TEC Oil Filter replacement: online guides and video tutorials
    Screw the new filter into its place. Use the 65/14-F socket. Observe the recommended tightening torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the HONDA City Saloon (GM2, GM3) model

City GM tyre size

Popular maintenance tutorials for City GM

More manuals for City GM

Complete guides for changing the Oil filters on different HONDA CITY models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY HONDA CITY Saloon (GM) Oil Filter replacement - online guide
Tips & tricks for your HONDA CITY Saloon (GM)
View more
  • How to change Oil filters on HONDA CITY Saloon (GM) 1.5 i-VTEC (GM2) - replacement tricks
    Discover the 4 Key Reasons Your CHECK ENGINE Light Could Be On | AUTODOC Tips
    7K views
    Published on: 30/03/2022
  • Changing Engine oil filter City GM 1.3 i-V TEC - Replacement Tips
    Why Checking Your Oil is Crucial for Engine Performance
    6K views
    Published on: 23/02/2023
  • Maintenance Hacks - HONDA CITY Saloon (GM) 1.5 i-VTEC Oil filters replacement guide
    Top 5 reasons why your car squeals | AUTODOC Tips
    10K views
    Published on: 26/10/2023
  • Replace Engine oil filter on City GM - free video tips
    Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
    7K views
    Published on: 19/01/2021

Most commonly replaced car parts on HONDA CITY

Professional manuals for the most common HONDA models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
HONDA CITY Saloon (GM) Oil Filter replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME