
Disclaimer
How to change track rod end on AUDI Q5 (8RB) – replacement guide
downloads:
6
Views:
50
Important!
This replacement procedure can be used for:
AUDI Q5 (8RB) 2.0 TFSI Hybrid quattro, AUDI Q5 (8RB) 2.0 TDI, AUDI Q5 (8RB) 2.0 TDI, AUDI Q5 (8RB) 2.0 TFSI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 3.0 TDI quattro, AUDI Q5 (8RB) 3.2 FSI quattro, AUDI Q5 (8RB) 2.0 TFSI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 3.0 TDI quattro, AUDI Q5 (8RB) 3.0 TDI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) SQ5 TDI quattro, AUDI Q5 (8RB) 2.0 TFSI quattro, AUDI Q5 (8RB) 3.0 TFSI quattro, AUDI Q5 (8RB) 2.0 TFSI quattro, AUDI Q5 (8RB) 2.0 TDI, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 3.0 TDI quattro, AUDI Q5 (8RB) SQ5 TFSI quattro, AUDI Q5 (8RB) 3.0 TDI quattro, AUDI Q5 (8RB) SQ5 TDI quattro, AUDI Q5 (8RB) 2.0 TFSI quattro, AUDI Q5 (8RB) SQ5 TDI quattro, AUDI Q5 (8RB) 2.0 TDI, AUDI Q5 (8RB) 2.0 TFSI Flexfuel quattro, AUDI Q5 (8RB) 2.0 TFSI Flexfuel quattro … View more
The steps may slightly vary depending on the car design.
AUDI Q5 (8RB) 2.0 TFSI Hybrid quattro, AUDI Q5 (8RB) 2.0 TDI, AUDI Q5 (8RB) 2.0 TDI, AUDI Q5 (8RB) 2.0 TFSI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 3.0 TDI quattro, AUDI Q5 (8RB) 3.2 FSI quattro, AUDI Q5 (8RB) 2.0 TFSI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 3.0 TDI quattro, AUDI Q5 (8RB) 3.0 TDI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) SQ5 TDI quattro, AUDI Q5 (8RB) 2.0 TFSI quattro, AUDI Q5 (8RB) 3.0 TFSI quattro, AUDI Q5 (8RB) 2.0 TFSI quattro, AUDI Q5 (8RB) 2.0 TDI, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 3.0 TDI quattro, AUDI Q5 (8RB) SQ5 TFSI quattro, AUDI Q5 (8RB) 3.0 TDI quattro, AUDI Q5 (8RB) SQ5 TDI quattro, AUDI Q5 (8RB) 2.0 TFSI quattro, AUDI Q5 (8RB) SQ5 TDI quattro, AUDI Q5 (8RB) 2.0 TDI, AUDI Q5 (8RB) 2.0 TFSI Flexfuel quattro, AUDI Q5 (8RB) 2.0 TFSI Flexfuel quattro … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Track Rod End for Q5 (8RB) and other AUDI models
Track rod end
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #21
Combination spanner #24
Drive socket # 21
Wheel impact socket #17
Torque wrench
Vernier caliper
Wheel chock
Replacement: track rod end – AUDI Q5 (8R). AUTODOC recommends:
- Replace tie rod ends in pairs.
- The replacement procedure is identical for the right and left tie rod ends.
- Please note: all work on the car – AUDI Q5 (8R) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.Replacement: track rod end – AUDI Q5 (8R). Tip:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 5Remove the wheel.
- Step 6Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the end fastening nut to the steering knuckle. Use a combination spanner #21.
- Step 8Clean the lock nut that connects the tie rod to the tie rod end. Use a wire brush. Use WD-40 spray.
- Step 9When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
- Step 10Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #24 (2 pieces).
- Step 11Disconnect the tie rod end from the steering knuckle.
- Step 12Screw the end out of the tie rod.
- Step 13Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
- Step 14Screw on a new tie rod end.Replacement: track rod end – AUDI Q5 (8R). AUTODOC experts recommend:While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
- Step 15When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI Q5 (8RB) model
Popular maintenance tutorials for Audi Q5 8RB
Complete guides for changing the Tie rod end on different AUDI Q5 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI Q5 (8RB)
View more
- TOP 5 mistakes during DIY oil change | AUTODOC tips
- DIY jack restoration | AUTODOC tips
- Checking the starter without removing it | AUTODOC tips
- Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
Most commonly replaced car parts on AUDI Q5
Time to replace parts? Get even better deals in our Shop app.

SCAN ME