Important!
This replacement procedure can be used for:
AUDI Q5 (8RB) 2.0 TFSI Hybrid quattro, AUDI Q5 (8RB) 2.0 TDI, AUDI Q5 (8RB) 2.0 TDI, AUDI Q5 (8RB) 2.0 TFSI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 3.0 TDI quattro, AUDI Q5 (8RB) 3.2 FSI quattro, AUDI Q5 (8RB) 2.0 TFSI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 3.0 TDI quattro, AUDI Q5 (8RB) 3.0 TDI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) SQ5 TDI quattro, AUDI Q5 (8RB) 2.0 TFSI quattro, AUDI Q5 (8RB) 3.0 TFSI quattro, AUDI Q5 (8RB) 2.0 TFSI quattro, AUDI Q5 (8RB) 2.0 TDI, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 3.0 TDI quattro, AUDI Q5 (8RB) SQ5 TFSI quattro, AUDI Q5 (8RB) 3.0 TDI quattro, AUDI Q5 (8RB) SQ5 TDI quattro, AUDI Q5 (8RB) 2.0 TFSI quattro, AUDI Q5 (8RB) SQ5 TDI quattro, AUDI Q5 (8RB) 2.0 TDI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for Q5 (8RB) and other AUDI models
Alternative products
How to change Anti-roll bar link on Audi Q5 8RB 2.0 TDI quattro – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – AUDI Q5 (8R). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #16
Drive socket # 16
Wheel impact socket #17
Ratchet wrench
Torque wrench
Hydraulic transmission jack
Wheel chock
Replacement: anti roll bar links – AUDI Q5 (8R). AUTODOC experts recommend:
  • Replace the stabiliser links on AUDI Q5 (8R) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – AUDI Q5 (8R). Use the following procedure:
  1. Step 1
    How to change Anti Roll Bar Links on Audi Q5 8RB 2008 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace AUDI Q5 (8RB) 2.0 TDI quattro 2009 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Audi Q5 8RB 3.0 TDI quattro 2010 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. AUDI Q5 (8R)
  4. Step 5
    Changing Anti Roll Bar Links on AUDI Q5 (8RB) SQ5 3.0 TDI quattro 2011 by yourself
    Remove the wheel.
  5. Step 6
    How to remove AUDI Q5 2.0 TDI 2012 Anti Roll Bar Links - online easy-to-follow instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Anti Roll Bar Links on AUDI Q5 (8RB) 2013: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer bar with the control arm. Use a drive socket #16. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Anti Roll Bar Links replacement on Audi Q5 8RB 3.0 TDI quattro 2014 - download illustrated guide
    Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a combination spanner #16 (2 pieces).
  8. Step 9
    Need to know how to renew Anti Roll Bar Links on AUDI Q5 2015? This free workshop manual will help you to do it yourself
    Remove the stabilizer rod.
    Replacement: anti roll bar links – AUDI Q5 (8R). Tip:
    Examine stabiliser bushes. Replace them if needed.
  9. Step 10
    Changing of Anti Roll Bar Links on Audi Q5 8RB 2016 won't be an issue if you follow this illustrated step-by-step guide
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  10. Step 11
    AUDI Q5 SQ5 3.0 TDI quattro Anti Roll Bar Links replacement: online guides and video tutorials
    Install a new rod, tighten the fasteners. Use a combination spanner #16 (2 pieces). Use a drive socket #16. Use a ratchet wrench.
  11. Step 12
    Replacing Anti Roll Bar Links on Audi Q5 8RB 2018 2.0 TDI quattro by yourself
    Support the arm. Use a hydraulic transmission jack.
  12. Step 13
    Q5 (8RB) 2.0 TDI 2019 Anti Roll Bar Links DIY replacement workshop manual
    Tighten the fastener connecting the stabilizer bar with the control arm. Use a combination spanner #16. Use a drive socket #16. Use a torque wrench. Tighten it to 40 Nm torque.+90°
    AUTODOC recommends:
    Important! Be sure to use new fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the AUDI Q5 (8RB) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY AUDI Q5 (8RB) Anti Roll Bar Links replacement - online guide
Tips & tricks for your AUDI Q5 (8RB)
View more
  • How to change Drop links on AUDI Q5 (8RB) 2.0 TFSI quattro - replacement tricks
    DIY alternator repair | AUTODOC tips
  • Changing Stabilizer link Audi Q5 8RB 2.0 TDI quattro - Replacement Tips
    Coolant comparison test | AUTODOC
  • Maintenance Hacks - AUDI Q5 (8RB) 3.0 TDI quattro Sway bar link replacement guide
    K2 ROTON wheel cleaner overview
  • Replace Drop link on Audi Q5 8RB - free video tips
    Top 5 reasons why your car squeals | AUTODOC Tips

Professional manuals for the most common AUDI models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
AUDI Q5 (8RB) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME