Important!
This replacement procedure can be used for:
AUDI Q5 (8RB) 2.0 TFSI Hybrid quattro, AUDI Q5 (8RB) 2.0 TDI, AUDI Q5 (8RB) 2.0 TDI, AUDI Q5 (8RB) 2.0 TFSI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 3.0 TDI quattro, AUDI Q5 (8RB) 3.2 FSI quattro, AUDI Q5 (8RB) 2.0 TFSI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 3.0 TDI quattro, AUDI Q5 (8RB) 3.0 TDI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) SQ5 TDI quattro, AUDI Q5 (8RB) 2.0 TFSI quattro, AUDI Q5 (8RB) 3.0 TFSI quattro, AUDI Q5 (8RB) 2.0 TFSI quattro, AUDI Q5 (8RB) 2.0 TDI, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 2.0 TDI quattro, AUDI Q5 (8RB) 3.0 TDI quattro, AUDI Q5 (8RB) SQ5 TFSI quattro, AUDI Q5 (8RB) 3.0 TDI quattro, AUDI Q5 (8RB) SQ5 TDI quattro, AUDI Q5 (8RB) 2.0 TFSI quattro, AUDI Q5 (8RB) SQ5 TDI quattro, AUDI Q5 (8RB) 2.0 TDI, AUDI Q5 (8RB) 2.0 TFSI Flexfuel quattro, AUDI Q5 (8RB) 2.0 TFSI Flexfuel quattro View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Control Arm for Q5 (8RB) and other AUDI models
Tools
Replacement: rear upper arm – AUDI Q5 (8R). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
Drive socket # 18
Wheel impact socket #17
Ratchet wrench
Torque wrench
Hydraulic transmission jack
Wheel chock
Replacement: rear upper arm – AUDI Q5 (8R). AUTODOC recommends:
  • The replacement procedure is identical for the right and left upper control arms.
  • All work should be done with the engine stopped.
Replacement: rear upper arm – AUDI Q5 (8R). Recommended sequence of steps:
  1. Step 1
    How to change Control Arm on Audi Q5 8RB 2008 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace AUDI Q5 (8RB) 2.0 TDI quattro 2009 Control Arm - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Audi Q5 8RB 3.0 TDI quattro 2010 Control Arm replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: rear upper arm – AUDI Q5 (8R). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Control Arm on AUDI Q5 (8RB) SQ5 3.0 TDI quattro 2011 by yourself
    Remove the wheel.
  5. Step 6
    How to remove AUDI Q5 2.0 TDI 2012 Control Arm - online easy-to-follow instructions
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Control Arm on AUDI Q5 (8RB) 2013: download PDF manuals and video instructions
    Make a mark on the camber adjustment bolt.
  7. Step 8
    How hard is it to do yourself: Control Arm replacement on Audi Q5 8RB 3.0 TDI quattro 2014 - download illustrated guide
    Support the arm. Use a hydraulic transmission jack.
  8. Step 9
    Need to know how to renew Control Arm on AUDI Q5 2015? This free workshop manual will help you to do it yourself
    Unscrew the arm fastening from the subframe. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
  9. Step 10
    Changing of Control Arm on Audi Q5 8RB 2016 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the fastener connecting the control arm to the rear knuckle. Use a drive socket #18. Use a ratchet wrench.
  10. Step 11
    AUDI Q5 SQ5 3.0 TDI quattro Control Arm replacement: online guides and video tutorials
    Remove the fastening bolts.
  11. Step 12
    Replacing Control Arm on Audi Q5 8RB 2008 2.0 TDI quattro by yourself
    Remove the rear upper arm.
  12. Step 13
    Q5 (8RB) 2.0 TDI 2009 Control Arm DIY replacement workshop manual
    Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
  13. Step 14
    How to change Control Arm on AUDI Q5 (8RB) 2010 - tips and tricks
    Mount the rear upper arm.
    Replacement: rear upper arm – AUDI Q5 (8R). AUTODOC experts recommend:
    During the installation process, use only new bolts and nuts.Do not damage the ball joint cover.
  14. Step 15
    Step-by-step recommendations for DIY replacement Audi Q5 8RB 2011 2.0 TDI Control Arm
    Install the fastening bolts.
  15. Step 16
    DIY replacement of Control Arm on AUDI Q5 (8RB) 2.0 TFSI quattro 2012 is not an issue anymore with our step-by-step tutorial
    Screw in the fastener that connects the control arm to the rear knuckle. Use a drive socket #18. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the AUDI Q5 (8RB) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
AUDI Q5 (8RB) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY AUDI Q5 (8RB) Control Arm replacement - online guide
Tips & tricks for your AUDI Q5 (8RB)
View more
  • How to change Control arm on AUDI Q5 (8RB) 2.0 TFSI quattro - replacement tricks
    What to do if the belt squeals | AUTODOC tips
  • Changing Wishbone Audi Q5 8RB 2.0 TDI quattro - Replacement Tips
    How to replace the suspension on a BMW E30 Turbo | SUPERCAR AUTODOC
  • Maintenance Hacks - AUDI Q5 (8RB) 3.0 TDI quattro Control arms replacement guide
    The most common problems when buying a used car | AUTODOC
  • Replace Trailing arm on Audi Q5 8RB - free video tips
    Top 5 brake repair mistakes | AUTODOC tips

Professional manuals for the most common AUDI models