Important!
This replacement procedure can be used for:
FORD TRANSIT Bus 2.2 TDCi, FORD TRANSIT Bus 2.2 TDCi, FORD TRANSIT Bus 2.2 TDCi RWD, FORD TRANSIT Bus 2.2 TDCi RWD, FORD TRANSIT Bus 2.4 TDCi, FORD TRANSIT Bus 2.4 TDCi, FORD TRANSIT Bus 2.2 TDCi, FORD TRANSIT Bus 2.2 TDCi, FORD TRANSIT Bus 2.2 TDCi, FORD TRANSIT Bus 2.4 TDCi, FORD TRANSIT Bus 2.4 TDCi 4x4, FORD TRANSIT Bus 3.2 TDCi, FORD TRANSIT Bus 2.2 TDCi, FORD TRANSIT Bus 2.2 TDCi, FORD TRANSIT Bus 2.2 TDCi RWD, FORD TRANSIT Bus 2.2 TDCi RWD View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for TRANSIT Bus and other FORD models
Tools
Replacement: track rod end – FORD TRANSIT Bus. List of the tools you'll need:
Wire brush
WD-40 spray
An all-purpose cleaning spray
Ceramic grease
Torque wrench
22 mm combination spanner
24 mm combination spanner
25 mm combination spanner
19 mm socket
22 mm socket
21 mm wheel impact socket
Ratchet wrench
Tommy bar
Vernier caliper
Ball joint separator
Wheel chocks
Replacement: track rod end – FORD TRANSIT Bus. Tip from AUTODOC:
  • Replace the tie rod ends in pairs.
  • All the work should be carried out with the ignition switched off.
Replacement: track rod end – FORD TRANSIT Bus. Take the following steps:
  1. Step 1
    How to change Track Rod End on Ford Transit mk7 Minibus 2006 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace FORD TRANSIT Bus 2.2 TDCi 2007 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel nuts. Use a 21 mm wheel impact socket. Use a tommy bar.
  3. Step 3
    Ford Transit mk7 Minibus 2.4 TDCi 2008 Track Rod End replacement: free workshop manuals
    Raise the car.
    Warning!
    If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands.
  4. Step 4
    Changing Track Rod End on FORD TRANSIT Bus 2.2 TDCi 2009 by yourself
    Unscrew the wheel nuts.
    Caution!
    To avoid injury, hold up the wheel when unscrewing the nuts.
  5. Step 5
    How to remove FORD TRANSIT 2.4 TDCi 2010 Track Rod End - online easy-to-follow instructions
    Remove the wheel.
  6. Step 6
    How to replace Track Rod End on FORD TRANSIT Bus 2011: download PDF manuals and video instructions
    Clean all tie rod end connections. Use a wire brush. Use WD-40 spray.
  7. Step 7
    How hard is it to do yourself: Track Rod End replacement on Ford Transit mk7 Minibus 2.2 TDCi 2012 - download illustrated guide
    Measure and note down the length of the exposed portion of the tie rod thread or the number of turns the tie rod end made when being unscrewed to prevent wheel misalignment during reassembly. Use a vernier caliper.
  8. Step 8
    Need to know how to renew Track Rod End on FORD TRANSIT 2013? This free workshop manual will help you to do it yourself
    Loosen the lock nut securing the tie rod end to the tie rod. Use a 22 mm combination spanner. Use a 24 mm combination spanner.
  9. Step 9
    Changing of Track Rod End on Ford Transit mk7 Minibus 2014 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the nut connecting the tie rod end to the steering knuckle. Use a 22 mm socket. Use a ratchet wrench.
  10. Step 10
    FORD TRANSIT 3.2 TDCi Track Rod End replacement: online guides and video tutorials
    Disconnect the tie rod end from the steering knuckle. Use a ball joint separator.
  11. Step 11
    Replacing Track Rod End on Ford Transit mk7 Minibus 2007 2.2 TDCi by yourself
    Unscrew the tie rod end from the tie rod.
  12. Step 12
    TRANSIT Bus 2.4 TDCi 2008 Track Rod End DIY replacement workshop manual
    Clean the mounting seats of the tie rod end. Use a wire brush. Use an all-purpose cleaning spray.
  13. Step 13
    How to change Track Rod End on FORD TRANSIT Bus 2009 - tips and tricks
    Screw on a new tie rod end.
    Replacement: track rod end – FORD TRANSIT Bus. AUTODOC recommends:
    When installing the tie rod end, remember to maintain the same length of the exposed tie rod thread or turn the tie rod end the same number of times.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FORD Transit Mk6 Minibus (V347, V348) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FORD TRANSIT Bus Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FORD TRANSIT Bus Track Rod End replacement - online guide
Tips & tricks for your FORD TRANSIT Bus
View more
  • How to change Tie rod end on FORD TRANSIT Bus 3.2 TDCi - replacement tricks
    Top 5 mistakes when replacing spark plugs | AUTODOC tips
  • Changing Outer tie rod Ford Transit mk7 Minibus 2.2 TDCi - Replacement Tips
    What to do if your check engine light is on | AUTODOC tips
  • Maintenance Hacks - FORD TRANSIT Bus 2.4 TDCi Track rod end ball joint replacement guide
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
  • Replace Outer tie rod end on Ford Transit mk7 Minibus - free video tips
    How to replace the suspension on a BMW E30 Turbo | SUPERCAR AUTODOC