When to replace the Poly V-Belt on your FORD TRANSIT
Recommended replacement interval for the part category V-Ribbed Belt Set : 10 year / 250000 km
Important!
This replacement procedure can be used for:
FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: serpentine belt – FORD TRANSIT MK-7 Platform/Chassis. List of the tools you'll need:
15 mm combination spanner
Mounting lever
Stretch belt removal/fitting tool
Replacement: serpentine belt – FORD TRANSIT MK-7 Platform/Chassis. AUTODOC experts recommend:
  • All the work should be carried out with the ignition switched off.
Replacement: serpentine belt – FORD TRANSIT MK-7 Platform/Chassis. Take the following steps:
  1. Step 1
    Lift the vehicle using a vehicle lift or place it over an inspection pit.
    Step 2
    How to change Poly V-Belt on FORD TRANSIT MK-7 Platform/Chassis 2006 - free PDF and video manuals
    Remove the V-ribbed belt of the power steering pump by turning the crankshaft pulley. Use a stretch belt removal/fitting tool. Use a mounting lever. Use a 15 mm combination spanner.
  2. Step 3
    How to replace FORD TRANSIT MK-7 Platform/Chassis 2.4 TDCi RWD 2007 Poly V-Belt - step-by-step manuals and video guides
    Remove the alternator V-ribbed belt by turning the crankshaft pulley. Use a stretch belt removal/fitting tool. Use a mounting lever. Use a 15 mm combination spanner.
  3. Step 4
    FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi 2008 Poly V-Belt replacement: free workshop manuals
    Check the condition of the alternator and power steering pump pulleys. Replace if necessary.
  4. Step 5
    Changing Poly V-Belt on FORD TRANSIT MK-7 Platform/Chassis 2.4 TDCi RWD 2009 by yourself
    Fit a new alternator V-ribbed belt by turning the crankshaft pulley. Use a stretch belt removal/fitting tool. Use a 15 mm combination spanner.
    Replacement: serpentine belt – FORD TRANSIT MK-7 Platform/Chassis. Tip:
    Be careful not to damage the V-ribbed belt when installing it.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FORD Transit Mk6 Platform / Chassis (V347, V348) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FORD TRANSIT MK-7 Platform/Chassis Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FORD TRANSIT MK-7 Platform/Chassis Poly V-Belt replacement - online guide
Tips & tricks for your FORD TRANSIT MK-7 Platform/Chassis
View more
  • How to change Alternator belt on FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi RWD - replacement tricks
    Coolant comparison test | AUTODOC
  • Changing Auxiliary belt FORD TRANSIT MK-7 Platform/Chassis 2.4 TDCi RWD - Replacement Tips
    How to restore a damaged thread | AUTODOC tips
  • Maintenance Hacks - FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi Poly V-belt replacement guide
    How to polish your car | AUTODOC tips
  • Replace Drive belt on FORD TRANSIT MK-7 Platform/Chassis - free video tips
    How to check your head gasket | AUTODOC