Disclaimer
How to change spark plugs on Renault Clio 2 – replacement guide
downloads:
21
Views:
536
Recommended replacement interval for the part category Spark plug : 60000 km
Important!
This replacement procedure can be used for:
RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.0 (CB06, CB2R, BB06, BB2R), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.2, RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.2 16V (BB05, BB0W, BB11, BB27, BB2T, BB2U, BB2V, CB05,... … View more
The steps may slightly vary depending on the car design.
RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.0 (CB06, CB2R, BB06, BB2R), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.2, RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.2 16V (BB05, BB0W, BB11, BB27, BB2T, BB2U, BB2V, CB05,... … View more
The steps may slightly vary depending on the car design.
How to change spark plug on RENAULT CLIO 2 (C65) [TUTORIAL AUTODOC]

All the parts you need to replace – Spark Plug for CLIO II (BB0/1/2_, CB0/1/2_) and other RENAULT models
Alternative products

High-temperature anti-seize lubricant
Spark plug socket # 16
Torque wrench
Round-nose pliers
Fender cover
Replacement: spark plugs – Renault Clio 2. AUTODOC recommends:
- The replacement procedure is the same for all spark plugs.
- Warning! Shut down the engine before starting any work – Renault Clio 2.
Carry out replacement in the following order:
- Step 1
Open the hood. - Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car. - Step 3
Remove the engine cover. - Step 4
Remove the spark plug wire connectors from the spark plug wells. Use round-nose pliers.Replacement: spark plugs – Renault Clio 2. AUTODOC experts recommend:Be careful to avoid damaging spark plug wires.Remember the sequence of the spark plug wires connectors. - Step 5
Clean dirt, dust and debris from inside the spark plug wells. - Step 6
Unscrew the spark plugs. Use the spark plug socket #16. - Step 7
Take out the spark plugs. Use the spark plug socket #16. - Step 8Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.Step 9
Install the new spark plugs into their mounting seats. Use the spark plug socket #16. - Step 10
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 28 nm torque.Replacement: spark plugs – Renault Clio 2. Professionals recommend:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Clio II Hatchback (BB, CB) model
Popular maintenance tutorials for Renault Clio 2
Complete guides for changing the Engine spark plug on different RENAULT CLIO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT CLIO II (BB0/1/2_, CB0/1/2_)
View more
How do EGR valves work? | AUTODOC
5 tools that make car repair incredibly simple | AUTODOC tips
Top 7 Manual Transmission Mistakes to Avoid | AUTODOC Tips
Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
Most commonly replaced car parts on RENAULT CLIO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





















