How to carry out replacement: Poly V-Belt 1.2 (BB0A, BB0F, BB10, BB1K, BB28, BB2D, BB2H, CB0A,... Renault Clio 2
Disclaimer
Change Renault Clio 2 1.2 (BB0A, BB0F, BB10, BB1K, BB28, BB2D, BB2H, CB0A,... Poly V-Belt yourself – manuals and video tutorials

How to change serpentine belt on RENAULT Clio II Hatchback (BB, CB) – replacement guide

downloads: 32
Views: 351
Download your free tutorial and fix RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.9 D (B/CB0E, BB0J) problems yourself Download for free 1.95 MB Poly V-Belt for Renault Clio 2 Shop now
Leave a comment Open in a new tab
When to replace the Poly V-Belt on your RENAULT CLIO
Recommended replacement interval for the part category Serpentine belt : 5 year / 120000 km
Important!
This replacement procedure can be used for:
RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.4 (B/CB0C, B/CB0S), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.6 (B/CB0D, BB00), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.6 16V (BB01, BB0H, BB0T, BB14, BB1D, BB1R, BB2KL, BB3G..., RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.6 (BB01, BB1J), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.6 16V, RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.4 16V (B/CB0L), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.4 16V (B/CB0P, BB13) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for CLIO II (BB0/1/2_, CB0/1/2_) and other RENAULT models
Alternative products
How to change Serpentine belt on Renault Clio 2 1.2 (BB0A, BB0F, BB10, BB1K, BB28, BB2D, BB2H, CB0A,... – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – RENAULT CLIO II (BB0/1/2_, CB0/1/2_). Tools you need:
Torque wrench
Combination spanner #13
Drive socket # 18
Wheel impact socket #19
Ratchet wrench
Phillips Screwdriver
Fender cover
Wheel chock
Buy tools
AUTODOC recommends:
  • Please note: all work on the car – RENAULT CLIO II (BB0/1/2_, CB0/1/2_) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Poly V-Belt on Renault Clio 2 1998 - free PDF and video manuals
    Secure the wheels with chocks. Loosen the wheel mounting bolts. Use wheel impact socket #19.
  2. Step 4
    Raise the car.
    Replacement: serpentine belt – RENAULT CLIO II (BB0/1/2_, CB0/1/2_). Tip from AUTODOC:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 5
    How to replace RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.2 (BB0A, BB0F, BB10, BB1K, BB28, BB2D, BB2H, CB0A,... 1999 Poly V-Belt - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. RENAULT CLIO II (BB0/1/2_, CB0/1/2_)
  3. Step 6
    Renault Clio 2 1.2 16V (BB05, BB0W, BB11, BB27, BB2T, BB2U, BB2V, CB05,... 2000 Poly V-Belt replacement: free workshop manuals
    Remove the wheel.
  4. Step 7
    Changing Poly V-Belt on RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.4 16V (B/CB0P, BB13) 2001 by yourself
    Unscrew and remove the wheel arch cover fasteners. Use a Phillips screwdriver.
  5. Step 8
    How to remove RENAULT CLIO 1.4 (B/CB0C, B/CB0S) 2002 Poly V-Belt - online easy-to-follow instructions
    Remove the wheel arch cover.
  6. Step 9
    How to replace Poly V-Belt on RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 2003: download PDF manuals and video instructions
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #13.
  7. Step 10
    How hard is it to do yourself: Poly V-Belt replacement on Renault Clio 2 1.6 16V (BB01, BB0H, BB0T, BB14, BB1D, BB1R, BB2KL, BB3G... 2004 - download illustrated guide
    Remove the V-ribbed belt.
    Replacement: serpentine belt – RENAULT CLIO II (BB0/1/2_, CB0/1/2_). Professionals recommend:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  8. Step 11
    Need to know how to renew Poly V-Belt on RENAULT CLIO 2005? This free workshop manual will help you to do it yourself
    Install the V-ribbed belt.
    AUTODOC recommends:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  9. Step 12
    Changing of Poly V-Belt on Renault Clio 2 2006 won't be an issue if you follow this illustrated step-by-step guide
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #13.
  10. Step 13
    RENAULT CLIO 1.2 (BB0A, BB0F, BB10, BB1K, BB28, BB2D, BB2H, CB0A,... Poly V-Belt replacement: online guides and video tutorials
    Place the V-ribbed belt on the tensioner pulley. Return the tensioner pulley to its initial position.
  11. Step 14
    Replacing Poly V-Belt on Renault Clio 2 2008 1.2 (BB0A, BB0F, BB10, BB1K, BB28, BB2D, BB2H, CB0A,... by yourself
    Rotate the crankshaft several times to check whether the new V-ribbed belt is working correctly. Use a drive socket #18. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Clio II Hatchback (BB, CB) model

Renault Clio 2 tyre size

Popular maintenance tutorials for Renault Clio 2

More manuals for Renault Clio 2

Complete guides for changing the Alternator belt on different RENAULT CLIO models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY RENAULT CLIO II (BB0/1/2_, CB0/1/2_) Poly V-Belt replacement - online guide
Tips & tricks for your RENAULT CLIO II (BB0/1/2_, CB0/1/2_)
View more
  • How to change Alternator belt on RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi - replacement tricks
    Top 5 reasons why the suspension knocks | AUTODOC tips
    2M views
    Published on: 09/09/2022
  • Changing Auxiliary belt Renault Clio 2 1.2 (BB0A, BB0F, BB10, BB1K, BB28, BB2D, BB2H, CB0A,... - Replacement Tips
    5 tools that make car repair incredibly simple | AUTODOC tips
    49K views
    Published on: 25/01/2024
  • Maintenance Hacks - RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.2 16V (BB05, BB0W, BB11, BB27, BB2T, BB2U, BB2V, CB05,... Poly V-belt replacement guide
    How to Fix P0401 ✅ error code Insufficient EGR flow
    7K views
    Published on: 08/05/2025
  • Replace Drive belt on Renault Clio 2 - free video tips
    Prevent Engine Damage: How to Identify Rocker Cover Gasket Issues and Proper Replacement | AUTODOC
    6K views
    Published on: 03/12/2020

Most commonly replaced car parts on RENAULT CLIO

Professional manuals for the most common RENAULT models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
RENAULT CLIO II (BB0/1/2_, CB0/1/2_) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME