Replacement: spark plugs – Peugeot 206 CC 2D. Tip from AUTODOC experts:
The replacement procedure is the same for all spark plugs.
Please note: all work on the car – Peugeot 206 CC 2D – should be done with the engine switched off.
Carry out replacement in the following order:
Step 1
Open the hood.
Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3
Unscrew the engine cover fastener. Use Torx T20.
Step 4
Remove the engine cover.
Replacement: spark plugs – Peugeot 206 CC 2D. AUTODOC recommends:
Raise the engine cover, holding it on two sides simultaneously.
Step 5
Remove the crankcase ventilation hoses.
Step 6
Detach the connector from the ignition coil.
Step 7
Unscrew the ignition coil bracket. Use Torx T27.
Step 8
Pry up the ignition coil. Use a crowbar.
Step 9
Take out the ignition coil from the spark plug well.
Step 10
Clean dirt, dust and debris from inside the spark plug wells.
Step 11
Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
Step 12
Take out the spark plugs.
Step 13
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
Step 14
Install the new spark plugs into their mounting seats. Use the spark plug socket #16.
Step 15
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 26 nm torque.
Replacement: spark plugs – Peugeot 206 CC 2D. Professionals recommend:
Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Step 16
Treat the ignition coil tips. Use high-temperature grease. Use a flat screwdriver.
Step 17
Plug in the ignition coil connector.
Step 18
Install the ignition coils to the spark plug wells. Make sure you hear a click indicating that it is locked in place.
Step 19
Tighten the fasteners of the ignition coils. Use Torx T20. Use a torque wrench. Tighten it to 8 nm torque.
Step 20
Install the crankcase ventilation hoses.
Step 21
Install the engine cover and secure it. Screw in the engine cover fasteners. Use Torx T20.
AUTODOC recommends:
Make sure the engine cover is properly seated. It should not be displaced with respect to the guiding fasteners and the throttle body air intake hose.Replacement: spark plugs – Peugeot 206 CC 2D. Do not use excessive force during installation. This may damage the fasteners.
Step 22
Run the engine for a few minutes. This is necessary in order to make sure that the component operates properly.
Step 23
Shut off the engine.
Step 24
Remove the fender protection cover.
Step 25
Close the hood.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 206 CC (2D) model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your PEUGEOT 206 CC (2D)
View more
Easy Steps to Fix Minor Scratches on Your Vehicle | AUTODOC tips
How to remove rust | AUTODOC tips
How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips
Understanding Airbag Light Warnings | Essential Tips for Car Safety