
Disclaimer
How to change spark plugs on FORD ESCORT CLASSIC Turnier (ANL) – replacement guide
downloads:
0
Views:
2

Recommended replacement interval for the part category Spark plug : 4 year / 60000 km
Important!
This replacement procedure can be used for:
FORD ESCORT CLASSIC Turnier (ANL) 1.6 16V … View more
The steps may slightly vary depending on the car design.
FORD ESCORT CLASSIC Turnier (ANL) 1.6 16V … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for ESCORT CLASSIC Turnier (ANL) and other FORD models
Spark plug
Alternative products

High-temperature anti-seize lubricant
Drive socket # 10
Spark plug socket # 16
Ratchet wrench
Torque wrench
Round-nose pliers
Clic-R collar pliers
Microfibre towel
Fender cover
Replacement: spark plugs – FORD ESCORT CLASSIC Turnier (ANL). Tip from AUTODOC:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – FORD ESCORT CLASSIC Turnier (ANL). Take the following steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Disconnect the air intake pipe from the air filter housing.
- Step 4Detach the air intake hose clamp. Use clic-R collar pliers.
- Step 5Remove the air intake pipe.
- Step 6Unscrew the filter housing fastening bolts. Use a drive socket #10. Use a ratchet wrench.
- Step 7Detach the crankcase ventilation hose from the engine cover at the left.Step 8Remove the air filter housing.Please note!The air filter housing is integrated into the engine cover.
- Step 9Cover the air intake hose with a microfibre towel to prevent dust and dirt from getting into the system.
- Step 10Remove the spark plug wire connectors from the spark plug wells. Use round-nose pliers.Replacement: spark plugs – FORD ESCORT CLASSIC Turnier (ANL). Professionals recommend:Be careful to avoid damaging spark plug wires.Remember the sequence of the spark plug wires connectors.
- Step 11Clean dirt, dust and debris from inside the spark plug wells.
- Step 12Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
- Step 13Take out the spark plugs.
- Step 14Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
- Step 15Install the new spark plugs into their mounting seats.
- Step 16Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 15 nm torque.Replacement: spark plugs – FORD ESCORT CLASSIC Turnier (ANL). AUTODOC recommends:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Escort Classic Estate (ANL) model
Popular maintenance tutorials for Ford Escort Classic Turnier ANL
Complete guides for changing the Engine spark plug on different FORD ESCORT models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD ESCORT CLASSIC Turnier (ANL)
View more
- Initial Car Inspection: What to Check Before You Buy
- TOP 6 WD-40 lifehacks | AUTODOC tips
- How to tighten cylinder head bolts
- DIY car soundproofing | AUTODOC tips
Most commonly replaced car parts on FORD ESCORT
Time to replace parts? Get even better deals in our Shop app.

SCAN ME