Disclaimer
How to change spark plugs on AUDI A8 (4H2, 4H8, 4HC, 4HL) – replacement guide
downloads:
11
Views:
157
Recommended replacement interval for the part category Spark plug : 6 year / 60000 km
Important!
This replacement procedure can be used for:
AUDI A8 (4H2, 4H8, 4HC, 4HL) 2.0 TFSI hybrid … View more
The steps may slightly vary depending on the car design.
AUDI A8 (4H2, 4H8, 4HC, 4HL) 2.0 TFSI hybrid … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for A8 (4H2, 4H8, 4HC, 4HL) and other AUDI models
Alternative products

High-temperature anti-seize lubricant
Torx bit T30
Spark plug socket # 16
Ratchet wrench
Torque wrench
Telescoping magnet
Fender cover
Replacement: spark plugs – AUDI A8 (4H_). AUTODOC experts recommend:
- The replacement procedure is the same for all spark plugs.
- Please note: all work on the car – AUDI A8 (4H_) – should be done with the engine switched off.
Replacement: spark plugs – AUDI A8 (4H_). Take the following steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Remove the engine cover.Replacement: spark plugs – AUDI A8 (4H_). Tip:Raise the engine cover, holding it on two sides simultaneously.Do not apply excessive force when removing the part. Otherwise you may damage it. - Step 4
Unscrew the fasteners of the ignition coil harness retainer. Use Torx T30. Use a ratchet wrench. - Step 5
Unplug the connectors from the ignition coils. - Step 6
Take out the ignition coils from the spark plug wells.Replacement: spark plugs – AUDI A8 (4H_). AUTODOC recommends:Remember the sequence of steps for ignition coil demounting. - Step 7
Clean dirt, dust and debris from inside the spark plug wells. - Step 8
Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench. - Step 9
Take out the spark plugs. Use a telescoping magnet. - Step 10
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. - Step 11
Install the new spark plugs into their mounting seats. Use the spark plug socket #16.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI A8 D4 (4H2, 4H8, 4HC, 4HL) model
Popular maintenance tutorials for Audi A8 D4
Complete guides for changing the Engine spark plug on different AUDI A8 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI A8 (4H2, 4H8, 4HC, 4HL)
View more
Which Coolant is Best? Comparison Test | AUTODOC
Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
Unveiling the secrets: Detecting vacuum leaks with a Smoke Machine | AUTODOC
How to unlock your car without a key | AUTODOC tips
Most commonly replaced car parts on AUDI A8
Time to replace parts? Get even better deals in our Shop app.

SCAN ME






















