Disclaimer
How to change serpentine belt on FORD Focus II Estate (DA_, FFS, DS) – replacement guide
downloads:
6
Views:
46
Recommended replacement interval for the part category Serpentine belt : 10 year / 200000 km
Important!
This replacement procedure can be used for:
FORD Focus II Estate (DA_, FFS, DS) 1.6 TDCi, FORD Focus II Estate (DA_, FFS, DS) 1.6 TDCi, FORD Focus II Estate (DA_, FFS, DS) 1.6 TDCi, FORD Focus II Estate (DA_, FFS, DS) 1.6 TDCi … View more
The steps may slightly vary depending on the car design.
FORD Focus II Estate (DA_, FFS, DS) 1.6 TDCi, FORD Focus II Estate (DA_, FFS, DS) 1.6 TDCi, FORD Focus II Estate (DA_, FFS, DS) 1.6 TDCi, FORD Focus II Estate (DA_, FFS, DS) 1.6 TDCi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for Focus II Estate (DA_, FFS, DS) and other FORD models
Alternative products

Combination spanner #15
Torx bit T30
Ratchet wrench
Fender cover
Replacement: serpentine belt – FORD FOCUS II Estate (DA_). AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: serpentine belt – FORD FOCUS II Estate (DA_). Use the following procedure:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Lift the car using a jack or place it over an inspection pit.Step 4
Undo the fasteners of the oil pan lower cover. Use Torx T30. Use a ratchet wrench. - Step 5
Remove the oil pan cover. - Step 6
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15. - Step 7
Remove the V-ribbed belt. - Step 8Return the tensioner pulley to its initial position.Replacement: serpentine belt – FORD FOCUS II Estate (DA_). Professionals recommend:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.Step 9
Install the V-ribbed belt.Replacement: serpentine belt – FORD FOCUS II Estate (DA_). AUTODOC experts recommend:Make sure that the V-ribbed belt fits all pulleys snugly. - Step 10Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15.Step 11
Place the V-ribbed belt on the tensioner pulley.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Focus Mk2 Estate (DA_, FFS, DS) model
Popular maintenance tutorials for Ford Focus 2 da
Complete guides for changing the Alternator belt on different FORD FOCUS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD Focus II Estate (DA_, FFS, DS)
View more
Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
How to inspect and troubleshoot your car heater when it’s not working
How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
How to tell if a tie rod is faulty
Most commonly replaced car parts on FORD FOCUS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
















