When to replace the Poly V-Belt on your FORD FIESTA
Recommended replacement interval for the part category Serpentine belt : 10 year / 240000 km
Important!
This replacement procedure can be used for:
FORD Fiesta Mk7 Hatchback 1.5 TDCi, FORD Fiesta Mk7 Hatchback 1.5 TDCi View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for Fiesta Mk7 Hatchback and other FORD models
Alternative products
How to change Serpentine belt on Ford Fiesta Mk7 1.0 EcoBoost – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – FORD FIESTA VII. Tools you'll need:
Combination spanner #15
Torx bit T30
Ratchet wrench
Fender cover
Replacement: serpentine belt – FORD FIESTA VII. AUTODOC recommends:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – FORD FIESTA VII. Use the following procedure:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Poly V-Belt on Ford Fiesta Mk7 2017 - free PDF and video manuals
    Undo the fasteners of the oil pan lower cover. Use Torx T30. Use a ratchet wrench.
  2. Step 5
    How to replace FORD Fiesta Mk7 Hatchback 1.0 EcoBoost 2018 Poly V-Belt - step-by-step manuals and video guides
    Remove the oil pan cover.
  3. Step 6
    Ford Fiesta Mk7 1.5 TDCi 2019 Poly V-Belt replacement: free workshop manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15.
  4. Step 7
    Changing Poly V-Belt on FORD Fiesta Mk7 Hatchback 1.1 Ti-VCT 2020 by yourself
    Remove the V-ribbed belt.
  5. Step 8
    Return the tensioner pulley to its initial position.
    Replacement: serpentine belt – FORD FIESTA VII. Professionals recommend:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
    Step 9
    How to remove FORD FIESTA 1.0 EcoBoost (Q0JA, Q0JB, Q0JC, Q0JD) 2021 Poly V-Belt - online easy-to-follow instructions
    Install the V-ribbed belt.
    Replacement: serpentine belt – FORD FIESTA VII. AUTODOC experts recommend:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  6. Step 10
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15.
    Step 11
    How to replace Poly V-Belt on FORD Fiesta Mk7 Hatchback 2022: download PDF manuals and video instructions
    Place the V-ribbed belt on the tensioner pulley.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FORD Fiesta Mk7 Hatchback model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY FORD Fiesta Mk7 Hatchback Poly V-Belt replacement - online guide
Tips & tricks for your FORD Fiesta Mk7 Hatchback
View more
  • How to change Alternator belt on FORD Fiesta Mk7 Hatchback 1.5 ST EcoBoost - replacement tricks
    How to tighten cylinder head bolts
  • Changing Auxiliary belt Ford Fiesta Mk7 1.0 EcoBoost - Replacement Tips
    Top 5 Mistakes to Avoid for Safe Engine Bay Repairs | AUTODOC Tips
  • Maintenance Hacks - FORD Fiesta Mk7 Hatchback 1.5 TDCi Poly V-belt replacement guide
    How to tell if a tie rod is faulty
  • Replace Drive belt on Ford Fiesta Mk7 - free video tips
    How to Order Car Parts Online: Avoid These 5 Common Pitfalls
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
FORD Fiesta Mk7 Hatchback Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME