Disclaimer
How to change right engine mounts on PEUGEOT 407 SW – replacement guide
downloads:
11
Views:
269
Important!
This replacement procedure can be used for:
PEUGEOT 407 SW (6E_) 1.6 HDi … View more
The steps may slightly vary depending on the car design.
PEUGEOT 407 SW (6E_) 1.6 HDi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Engine Mount for 407 SW (6E_) and other PEUGEOT models
Alternative products

Wire brush
WD-40 spray
Sealant
Copper grease
Torque wrench
Drive socket # E14
Torx bit T50
Ratchet wrench
Clip removal tool
Jack
Fender cover
Wheel chock
Replacement: engine mounts – PEUGEOT 407 SW (6E_). AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: engine mounts – PEUGEOT 407 SW (6E_). Recommended sequence of steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Release the coolant reservoir retainers. Use a clip removal tool. - Step 4
Remove the coolant reservoir cap. - Step 5
Remove the engine cover.AUTODOC recommends:Replacement: engine mounts – PEUGEOT 407 SW (6E_). Do not use excessive force when removing the part as this may damage it. - Step 6
Support the engine in the oil pan area. Use a jack. - Step 7
Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray. - Step 8
Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #E14. Use a ratchet wrench. - Step 9
Unscrew the engine mount fasteners. Use Torx T50. Use a ratchet wrench. - Step 10
Remove the engine mount.Replacement: engine mounts – PEUGEOT 407 SW (6E_). AUTODOC recommends:Carefully check the other engine mounts and replace them if necessary. - Step 11
Remove the fastening bolts. - Step 12
Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray. - Step 13
Treat the engine mount fasteners. Use a sealant. - Step 14
Install the engine mount to its mounting seat. - Step 15
Install the fastening bolts.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 407 SW model
Popular maintenance tutorials for Peugeot 407 SW
Complete guides for changing the Engine mounts on different PEUGEOT 407 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PEUGEOT 407 SW (6E_)
View more
5 reasons why your car is making a knocking sound
5 possible reasons why your car heater isn't working
Don’t Replace, Just Polish! Headlight Restoration with AUTODOC
When, why, and how to change engine oil | AUTODOC tips
Most commonly replaced car parts on PEUGEOT 407
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



























