How to change rear windshield wipers on FIAT 500 Hatchback (312) – replacement guide
downloads:
7
Views:
141
0
Users voted – 0
Recommended replacement interval for the part category Wiper blade : 12month
Important!
This replacement procedure can be used for:
FIAT 500 (312) 1.3 D Multijet (312AXE1A),
FIAT 500 (312) 1.3 D Multijet (312AXB1A),
FIAT 500 (312) 1.4 (312AXC1B, 312CXC1B),
FIAT 500 (312) 1.2 (312AXA1A),
FIAT 500 (312) 1.2 LPG (312AXA1A),
FIAT 500 (312) 0.9 (312AXG1A, 312.AXG11)
…
View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wiper Blades for 500 (312) and other FIAT models
Rear wiper blade for FIAT 500 (312) 0.9 (312AXG1A, 312.AXG11) Petrol (86 hp)
Rear wiper blade for FIAT 500 (312) 1.2 LPG (312AXA1A) Petrol/Petroleum Gas (LPG) (69 hp)
Rear wiper blade for FIAT 500 (312) 1.2 (312AXA1A) Petrol (69 hp)
Rear wiper blade for FIAT 500 (312) 1.4 (312AXC1B, 312CXC1B) Petrol (100 hp)
Rear wiper blade for FIAT 500 (312) 1.3 D Multijet (312AXB1A) Diesel (75 hp)
Rear wiper blade for FIAT 500 (312) 1.3 D Multijet (312AXE1A) Diesel (95 hp)
Wiper Arm Set, window cleaning for FIAT 500 (312) 0.9 (312AXG1A, 312.AXG11) Petrol (86 hp)
Wiper Arm Set, window cleaning for FIAT 500 (312) 1.2 LPG (312AXA1A) Petrol/Petroleum Gas (LPG) (69 hp)
Wiper Arm Set, window cleaning for FIAT 500 (312) 1.2 (312AXA1A) Petrol (69 hp)
Wiper Arm Set, window cleaning for FIAT 500 (312) 1.4 (312AXC1B, 312CXC1B) Petrol (100 hp)
Wiper Arm Set, window cleaning for FIAT 500 (312) 1.3 D Multijet (312AXB1A) Diesel (75 hp)
Wiper Arm Set, window cleaning for FIAT 500 (312) 1.3 D Multijet (312AXE1A) Diesel (95 hp)
AUTODOC recommends:
Please note: all work on the car – FIAT 500 (312) – should be done with the engine switched off.
Carry out replacement in the following order:
Step 1
Prepare the new windscreen wipers.
Step 2
Pull the wiper arm away from the glass surface until it stops.
Step 3
Turn the wiper blade by ninety degrees. Remove the blade from the wiper arm.
Replacement: windshield wipers – FIAT 500 (312). Professionals recommend:
When replacing the wiper blade, take caution to prevent the spring-loaded wiper arm from hitting the glass.
Step 4
Install the new wiper blade and carefully press the wiper arm down to the glass.
Replacement: windshield wipers – FIAT 500 (312). AUTODOC recommends:
Don't touch the wiper blade at the working rubber edge to prevent damage to the graphite coating. Ensure that the blade rubber strip fits tightly to the glass along the entire length.
Step 5
Switch on the ignition.
Step 6
After installation check the wipers performance.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your FIAT 500 (312)
View more
DIY car soundproofing | AUTODOC tips
How to remove scratches from a car | AUTODOC tips
How to polish an old engine valve cover to a shiny finish | AUTODOC Tips