How to carry out replacement: Wheel Bearing D5 AWD Volvo XC90 Mk1
Disclaimer
Change Volvo XC90 Mk1 D5 AWD Wheel Bearing yourself – manuals and video tutorials

How to change rear wheel bearing on Volvo XC90 1 – replacement guide

downloads: 16
Views: 379
Download your free tutorial and fix VOLVO XC90 I (275) 2.5 AWD problems yourself Download for free 1.94 MB Wheel Bearing for Volvo XC90 Mk1 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
VOLVO XC90 I (275) D5 AWD, VOLVO XC90 I (275) D5 AWD, VOLVO XC90 I (275) 3.2 AWD, VOLVO XC90 I (275) 2.5 T AWD, VOLVO XC90 I (275) T6 AWD, VOLVO XC90 I (275) V8 AWD, VOLVO XC90 I (275) D5 AWD, VOLVO XC90 I (275) 3.2 AWD, VOLVO XC90 I (275) 3.2, VOLVO XC90 I (275) 3.2, VOLVO XC90 I (275) V8 AWD, VOLVO XC90 I (275) 2.5 T AWD, VOLVO XC90 I (275) 2.5, VOLVO XC90 I (275) 2.5 AWD, VOLVO XC90 I (275) D5 AWD, VOLVO XC90 I (275) D3 / D5 … View more

The steps may slightly vary depending on the car design.

How to change a Rear wheel bearing on VOLVO XC90 1 TUTORIAL | AUTODOC

video
Published on: 26/07/2018
73K views
All the parts you need to replace – Wheel Bearing for XC90 I (275) and other VOLVO models
Alternative products
How to change Wheel bearing kit on Volvo XC90 Mk1 D5 AWD – step-by-step instructions for straightforward car repair Wheel bearing kit
Tools
Replacement: wheel bearing – Volvo XC90 1. Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #10
Combination spanner #13
Combination spanner #16
Combination spanner #18
Drive socket # 13
Drive socket # 15
Drive socket # 16
Wheel impact socket #19
Ratchet wrench
Torque wrench
Flat Screwdriver
Pin punch
Hammer
Rubber mallet
Crow bar
Tap wrench
Hydraulic transmission jack
Wheel chock
Buy tools
AUTODOC recommends:
  • Do not re-use the bearing assembly of your Volvo XC90 1 car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • Please note: all work on the car – Volvo XC90 1 – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Wheel Bearing on Volvo XC90 Mk1 2002 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace VOLVO XC90 I (275) D5 AWD 2003 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Volvo XC90 Mk1 2.5 T AWD 2004 Wheel Bearing replacement: free workshop manuals
    Raise the rear of the car and secure on supports.
  4. Step 4
    Changing Wheel Bearing on VOLVO XC90 I (275) V8 AWD 2005 by yourself
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Volvo XC90 1
  5. Step 5
    How to remove VOLVO XC90 3.2 AWD 2006 Wheel Bearing - online easy-to-follow instructions
    Remove the wheel.
  6. Step 6
    Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
    Step 7
    How to replace Wheel Bearing on VOLVO XC90 I (275) 2007: download PDF manuals and video instructions
    Unscrew the caliper bracket fastening. Use a combination spanner #13.
  7. Step 8
    How hard is it to do yourself: Wheel Bearing replacement on Volvo XC90 Mk1 2.4 D3 / D5 2008 - download illustrated guide
    Remove the brake caliper together with its bracket.
    Replacement: wheel bearing – Volvo XC90 1. Tip from AUTODOC:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur.Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  8. Step 9
    Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray.
    Step 10
    Need to know how to renew Wheel Bearing on VOLVO XC90 2009? This free workshop manual will help you to do it yourself
    Unscrew the brake disc fastening. Use a combination spanner #10. Use a ratchet wrench.
  9. Step 11
    Changing of Wheel Bearing on Volvo XC90 Mk1 2010 won't be an issue if you follow this illustrated step-by-step guide
    Remove the brake disc.
  10. Step 12
    VOLVO XC90 D5 AWD Wheel Bearing replacement: online guides and video tutorials
    Unscrew the fastener connecting the drive shaft to the wheel hub. Use a drive socket #13. Use a ratchet wrench.
  11. Step 13
    Remove the drive shaft. Use a pin punch. Use a hammer.
    Step 14
    Clean the control arm fasteners. Use a wire brush. Use WD-40 spray.
    Step 15
    Replacing Wheel Bearing on Volvo XC90 Mk1 2012 D5 AWD by yourself
    Unscrew the fastener connecting the control arm to the rear knuckle. Use a combination spanner #18. Use a drive socket #15. Use a ratchet wrench.
  12. Step 16
    Remove the fastening bolt.
    Step 17
    Detach the control arm.
    Step 18
    XC90 I (275) 3.2 AWD 2013 Wheel Bearing DIY replacement workshop manual
    Unscrew the wheel hub axle nut. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench. Use a tap wrench.
  13. Step 19
    How to change Wheel Bearing on VOLVO XC90 I (275) 2014 - tips and tricks
    Remove the hub and the bearing together, since they are a sealed unit. Use a rubber mallet.
  14. Step 20
    Clean the hub bearing mounting seat. Use a wire brush. Use WD-40 spray.
    Step 21
    Step-by-step recommendations for DIY replacement Volvo XC90 Mk1 2002 3.2 AWD Wheel Bearing
    Install the new wheel hub with a bearing.
  15. Step 22
    Mount the drive shaft into the wheel hub.
    Step 23
    DIY replacement of Wheel Bearing on VOLVO XC90 I (275) T6 AWD 2003 is not an issue anymore with our step-by-step tutorial
    Tighten the hub. Use a combination spanner #16. Use a drive socket #16. Use a torque wrench. Tighten it to 45 Nm torque.+60°
    Replacement: wheel bearing – Volvo XC90 1. AUTODOC experts recommend:
    The wheel bearing unit must not tilt on the axle pin.Important! Be sure to use new fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VOLVO XC90 I (C, 275) model

Volvo XC90 Mk1 tyre size

Popular maintenance tutorials for Volvo XC90 Mk1

More manuals for Volvo XC90 Mk1

Complete guides for changing the Wheel bearings on different VOLVO XC90 models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VOLVO XC90 I (275) Wheel Bearing replacement - online guide
Tips & tricks for your VOLVO XC90 I (275)
View more
  • How to change Wheel bearings on VOLVO XC90 I (275) T6 AWD - replacement tricks
    How do EGR valves work? | AUTODOC
    23K views
    Published on: 18/07/2020
  • Changing Hub bearing Volvo XC90 Mk1 D5 AWD - Replacement Tips
    How to replace a timing chain yourself
    21K views
    Published on: 12/12/2024
  • Maintenance Hacks - VOLVO XC90 I (275) 2.5 T AWD Wheel bearing kit replacement guide
    Top 7 signs of a bad starter
    5K views
    Published on: 20/03/2025
  • Replace Wheel hub bearing on Volvo XC90 Mk1 - free video tips
    DIY rear axle restoration | Drivetrain restoration – Part 2
    7K views
    Published on: 07/11/2024

Most commonly replaced car parts on VOLVO XC90

Professional manuals for the most common VOLVO models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VOLVO XC90 I (275) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME