Disclaimer
How to change rear wheel bearing on RENAULT MEGANE I Grandtour (KA0/1_) – replacement guide
downloads:
1
Views:
64
Important!
This replacement procedure can be used for:
RENAULT MEGANE I Grandtour (KA0/1_) 1.6 16V (KA0B, KA04, KA11), RENAULT MEGANE I Grandtour (KA0/1_) 1.4 16V (KA0D, KA1H, KA0W, KA10), RENAULT MEGANE I Grandtour (KA0/1_) 1.9 dTi (KA0N), RENAULT MEGANE I Grandtour (KA0/1_) 1.9 D (KA0J, KA0R), RENAULT MEGANE I Grandtour (KA0/1_) 1.4 e (KA0V) … View more
The steps may slightly vary depending on the car design.
RENAULT MEGANE I Grandtour (KA0/1_) 1.6 16V (KA0B, KA04, KA11), RENAULT MEGANE I Grandtour (KA0/1_) 1.4 16V (KA0D, KA1H, KA0W, KA10), RENAULT MEGANE I Grandtour (KA0/1_) 1.9 dTi (KA0N), RENAULT MEGANE I Grandtour (KA0/1_) 1.9 D (KA0J, KA0R), RENAULT MEGANE I Grandtour (KA0/1_) 1.4 e (KA0V) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for MEGANE I Grandtour (KA0/1_) and other RENAULT models
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
Drive socket # 30
Wheel impact socket #19
Rubber mallet
Tap wrench
Hammer
Crow bar
Wheel chock
Replacement: wheel bearing – RENAULT MEGANE I Grandtour (KA0/1_). AUTODOC experts recommend:
- Do not re-use the bearing assembly of your RENAULT MEGANE I Grandtour (KA0/1_) car.
- The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
- Please note: all work on the car – RENAULT MEGANE I Grandtour (KA0/1_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. RENAULT MEGANE I Grandtour (KA0/1_) - Step 5
Remove the wheel. - Step 6
Clean the brake drum. Use a wire brush. Use WD-40 spray. - Step 7
Remove the hub bearing protection cap. Use a hammer. Use a crowbar.Replacement: wheel bearing – RENAULT MEGANE I Grandtour (KA0/1_). Professionals recommend:Some cars are not equipped with wheel hub caps. - Step 8
Unscrew the wheel hub axle nut. Use a drive socket #30. Use a tap wrench. - Step 9
Remove the brake drum assembled with the wheel hub bearing. - Step 10
Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Megane I Grandtour (KA) model
Popular maintenance tutorials for Renault Megane 1 Grandtour
Complete guides for changing the Wheel bearings on different RENAULT MEGANE models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT MEGANE I Grandtour (KA0/1_)
View more
How to Install a New Windscreen Yourself | AUTODOC Expert Tips
Which Coolant is Best? Comparison Test | AUTODOC
DIY brake caliper restoration | AUTODOC tips
5 signs of a faulty strut mount and how to fix it
Most commonly replaced car parts on RENAULT MEGANE
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


























