Disclaimer
How to change front anti roll bar links on RENAULT Megane I Grandtour (KA) – replacement guide
downloads:
6
Views:
77
Important!
This replacement procedure can be used for:
RENAULT MEGANE I Grandtour (KA0/1_) 1.4 e (KA0V), RENAULT MEGANE I Grandtour (KA0/1_) 1.6 e (KA0F), RENAULT MEGANE I Grandtour (KA0/1_) 1.9 D (KA0J, KA0R), RENAULT MEGANE I Grandtour (KA0/1_) 1.9 dTi (KA0N), RENAULT MEGANE I Grandtour (KA0/1_) 1.4 16V (KA0D, KA1H, KA0W, KA10), RENAULT MEGANE I Grandtour (KA0/1_) 1.6 16V (KA0B, KA04, KA11), RENAULT MEGANE I Grandtour (KA0/1_) 1.9 dCi (KA05, KA1F), RENAULT MEGANE I Grandtour (KA0/1_) 1.9 dTi (KA1U), RENAULT MEGANE I Grandtour (KA0/1_) 1.8 16V (KA0S, KA12, KA1A, KA1M, KA1R) … View more
The steps may slightly vary depending on the car design.
RENAULT MEGANE I Grandtour (KA0/1_) 1.4 e (KA0V), RENAULT MEGANE I Grandtour (KA0/1_) 1.6 e (KA0F), RENAULT MEGANE I Grandtour (KA0/1_) 1.9 D (KA0J, KA0R), RENAULT MEGANE I Grandtour (KA0/1_) 1.9 dTi (KA0N), RENAULT MEGANE I Grandtour (KA0/1_) 1.4 16V (KA0D, KA1H, KA0W, KA10), RENAULT MEGANE I Grandtour (KA0/1_) 1.6 16V (KA0B, KA04, KA11), RENAULT MEGANE I Grandtour (KA0/1_) 1.9 dCi (KA05, KA1F), RENAULT MEGANE I Grandtour (KA0/1_) 1.9 dTi (KA1U), RENAULT MEGANE I Grandtour (KA0/1_) 1.8 16V (KA0S, KA12, KA1A, KA1M, KA1R) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for MEGANE I Grandtour (KA0/1_) and other RENAULT models
Alternative products

Wire brush
WD-40 spray
Copper grease
Drive socket # 13
Torx bit T45
Wheel impact socket #19
Ratchet wrench
Torque wrench
Hydraulic transmission jack
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on RENAULT MEGANE I Grandtour (KA0/1_) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – RENAULT MEGANE I Grandtour (KA0/1_). Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: anti roll bar links – RENAULT MEGANE I Grandtour (KA0/1_). Tip from AUTODOC experts:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the stabilizer rod fasteners. Use a drive socket #13. Use a ratchet wrench. - Step 8
Remove the stabilizer rod.Replacement: anti roll bar links – RENAULT MEGANE I Grandtour (KA0/1_). Tip from AUTODOC:Examine stabiliser bushes. Replace them if needed. - Step 9
Clean all joints of the stabiliser link. Use a wire brush. Treat all joints of the stabiliser link. Use WD-40 spray. - Step 10
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Megane I Grandtour (KA) model
Popular maintenance tutorials for Renault Megane 1 Grandtour
Complete guides for changing the Drop links on different RENAULT MEGANE models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT MEGANE I Grandtour (KA0/1_)
View more
#DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!
Top 5 possible reasons your car is shaking or vibrating
How to Order Car Parts Online: Avoid These 5 Common Pitfalls
DIY car soundproofing | AUTODOC tips
Most commonly replaced car parts on RENAULT MEGANE
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



























