Important!
This replacement procedure can be used for:
FIAT COUPE (FA/175) 2.0 20V, FIAT COUPE (FA/175) 2.0 20V Turbo, FIAT COUPE (FA/175) 2.0 20V (175AXC1A), FIAT COUPE (FA/175) 1.8 16V, FIAT COUPE (FA/175) 2.0 16V Turbo, FIAT COUPE (FA/175) 2.0 16V View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: wheel bearing – FIAT COUPE (FA/175). Tools you might need:
Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
Drive socket # 12
Drive socket # 32
Wheel impact socket #19
Ratchet wrench
Torque wrench
Hammer
Tap wrench
Rubber mallet
Crow bar
Wheel chock
Replacement: wheel bearing – FIAT COUPE (FA/175). Tip from AUTODOC:
  • Do not re-use the bearing assembly of your FIAT COUPE (FA/175) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • Please note: all work on the car – FIAT COUPE (FA/175) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Wheel Bearing on Fiat Coupe 175 1993 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace FIAT COUPE (FA/175) 2.0 20V Turbo 1994 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Fiat Coupe 175 2.0 16V Turbo 1995 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. FIAT COUPE (FA/175)
  4. Step 5
    Changing Wheel Bearing on FIAT COUPE (FA/175) 2.0 16V 1996 by yourself
    Remove the wheel.
  5. Step 6
    How to remove FIAT COUPE 2.0 20V 1997 Wheel Bearing - online easy-to-follow instructions
    Clean the brake drum. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Wheel Bearing on FIAT COUPE (FA/175) 1998: download PDF manuals and video instructions
    Unscrew the brake drum fastening. Use a drive socket #12. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Wheel Bearing replacement on Fiat Coupe 175 2.0 20V Turbo 1999 - download illustrated guide
    Remove the brake drum.
    Replacement: wheel bearing – FIAT COUPE (FA/175). Tip from AUTODOC experts:
    Examine the brake drum. Replace it if necessary.
  8. Step 9
    Need to know how to renew Wheel Bearing on FIAT COUPE 2000? This free workshop manual will help you to do it yourself
    Remove the hub bearing protection cap. Use a crowbar. Use a hammer.
    Replacement: wheel bearing – FIAT COUPE (FA/175). AUTODOC experts recommend:
    Some cars are not equipped with wheel hub caps.
  9. Step 10
    Changing of Wheel Bearing on Fiat Coupe 175 1993 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the wheel hub axle nut. Use a drive socket #32. Use a tap wrench.
  10. Step 11
    FIAT COUPE 1.8 16V Wheel Bearing replacement: online guides and video tutorials
    Remove the hub and the bearing together, since they are a sealed unit.
  11. Step 12
    Replacing Wheel Bearing on Fiat Coupe 175 1995 2.0 20V Turbo by yourself
    Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
  12. Step 13
    COUPE (FA/175) 2.0 20V 1996 Wheel Bearing DIY replacement workshop manual
    Install the new wheel hub with a bearing.
  13. Step 14
    How to change Wheel Bearing on FIAT COUPE (FA/175) 1997 - tips and tricks
    Tighten the hub. Use a drive socket #32. Use a torque wrench. Tighten it to 280 nm torque.
    Replacement: wheel bearing – FIAT COUPE (FA/175). Tip:
    The wheel bearing unit must not tilt on the axle pin.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FIAT Coupe (175) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FIAT COUPE (FA/175) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FIAT COUPE (FA/175) Wheel Bearing replacement - online guide
Tips & tricks for your FIAT COUPE (FA/175)
View more
  • How to change Wheel bearings on FIAT COUPE (FA/175) 1.8 16V - replacement tricks
    DIY brake caliper restoration | AUTODOC tips
  • Changing Hub bearing Fiat Coupe 175 2.0 20V Turbo - Replacement Tips
    Replacing your engine cooling fan | AUTODOC tips
  • Maintenance Hacks - FIAT COUPE (FA/175) 2.0 16V Turbo Wheel bearing kit replacement guide
    How to reduce fuel consumption | AUTODOC
  • Replace Wheel hub bearing on Fiat Coupe 175 - free video tips
    Important differences between car tools | AUTODOC tips