Important!
This replacement procedure can be used for:
AUDI A4 Saloon (8E2, B6) 1.8 T, AUDI A4 Saloon (8E2, B6) 2.0, AUDI A4 Saloon (8E2, B6) 3.0, AUDI A4 Saloon (8E2, B6) 1.9 TDI, AUDI A4 Saloon (8E2, B6) 1.6, AUDI A4 Saloon (8E2, B6) 2.5 TDI, AUDI A4 Saloon (8E2, B6) 1.9 TDI, AUDI A4 Saloon (8E2, B6) 2.4, AUDI A4 Saloon (8E2, B6) 2.0 FSI, AUDI A4 Saloon (8E2, B6) 1.8 T, AUDI A4 Saloon (8E2, B6) 2.5 TDI, AUDI A4 Saloon (8E2, B6) 2.4, AUDI A4 Saloon (8E2, B6) 1.8 T, AUDI A4 Saloon (8E2, B6) 1.9 TDI, AUDI A4 Saloon (8E2, B6) 3.0 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for A4 Saloon (8E2, B6) and other AUDI models
Tools
Replacement: wheel bearing – AUDI A4 (8E2, B6). List of the tools you'll need:
Wire brush
WD-40 spray
All-purpose cleaning spray
Brake cleaner
Copper grease
Combination spanner #13
Combination spanner #15
Drive socket # 13
HEX bit no.H8.
HEX bit no.H19.
Wheel impact socket #17
Brake caliper wind back tool
Torque wrench
Tap wrench
Rubber mallet
Hammer
Crow bar
Wheel chock
Replacement: wheel bearing – AUDI A4 (8E2, B6). AUTODOC recommends:
  • Do not re-use the bearing assembly of your AUDI A4 (8E2, B6) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – AUDI A4 (8E2, B6). Use the following procedure:
  1. Step 1
    How to change Wheel Bearing on Audi A4 B6 2000 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace AUDI A4 Saloon (8E2, B6) 1.9 TDI 2001 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Audi A4 B6 2.0 2002 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: wheel bearing – AUDI A4 (8E2, B6). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Wheel Bearing on AUDI A4 Saloon (8E2, B6) 1.8 T 2003 by yourself
    Remove the wheel.
  5. Step 6
    How to remove AUDI A4 1.6 2004 Wheel Bearing - online easy-to-follow instructions
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Wheel Bearing on AUDI A4 Saloon (8E2, B6) 2000: download PDF manuals and video instructions
    Unscrew the brake caliper fastening. Use a combination spanner #13. Use a combination spanner #15.
  7. Step 8
    How hard is it to do yourself: Wheel Bearing replacement on Audi A4 B6 2.5 TDI 2001 - download illustrated guide
    Remove the brake caliper. Use a crowbar.
    Replacement: wheel bearing – AUDI A4 (8E2, B6). AUTODOC experts recommend:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  8. Step 9
    Need to know how to renew Wheel Bearing on AUDI A4 2002? This free workshop manual will help you to do it yourself
    Remove the brake pads. Use a crowbar.
  9. Step 10
    Changing of Wheel Bearing on Audi A4 B6 2003 won't be an issue if you follow this illustrated step-by-step guide
    Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
  10. Step 11
    AUDI A4 1.9 TDI Wheel Bearing replacement: online guides and video tutorials
    Unscrew the caliper bracket fastening. Use HEX No.H8.
  11. Step 12
    Replacing Wheel Bearing on Audi A4 B6 2000 1.9 TDI by yourself
    Remove the caliper bracket.
  12. Step 13
    A4 Saloon (8E2, B6) 1.6 2001 Wheel Bearing DIY replacement workshop manual
    Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray.
  13. Step 14
    How to change Wheel Bearing on AUDI A4 Saloon (8E2, B6) 2002 - tips and tricks
    Remove the retaining ring. Use a crowbar.
  14. Step 15
    Step-by-step recommendations for DIY replacement Audi A4 B6 2003 1.6 Wheel Bearing
    Remove the brake disc.
  15. Step 16
    DIY replacement of Wheel Bearing on AUDI A4 Saloon (8E2, B6) 2.5 TDI quattro 2004 is not an issue anymore with our step-by-step tutorial
    Remove the hub bearing protection cap. Use a hammer. Use a crowbar.
    Replacement: wheel bearing – AUDI A4 (8E2, B6). Tip from AUTODOC:
    Some cars are not equipped with wheel hub caps.
  16. Step 17
    How to change Wheel Bearing on Audi A4 B6 2000 - free PDF and video manuals
    Unscrew the hub bearing mounting. Use HEX No.H19. Use a tap wrench.
  17. Step 18
    How to replace AUDI A4 Saloon (8E2, B6) 1.9 TDI 2001 Wheel Bearing - step-by-step manuals and video guides
    Remove the fastening bolt.
  18. Step 19
    Audi A4 B6 2.0 2002 Wheel Bearing replacement: free workshop manuals
    Remove the hub and the bearing together, since they are a sealed unit.
  19. Step 20
    Changing Wheel Bearing on AUDI A4 Saloon (8E2, B6) 1.8 T 2003 by yourself
    Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
  20. Step 21
    How to remove AUDI A4 1.6 2004 Wheel Bearing - online easy-to-follow instructions
    Install the new wheel hub with a bearing.
  21. Step 22
    How to replace Wheel Bearing on AUDI A4 Saloon (8E2, B6) 2000: download PDF manuals and video instructions
    Install the fastening bolt.
  22. Step 23
    How hard is it to do yourself: Wheel Bearing replacement on Audi A4 B6 2.5 TDI 2001 - download illustrated guide
    Tighten the fastener of the wheel hub bearing. Use HEX No.H19. Use a torque wrench. Tighten it to 200 Nm torque.+180°
    Replacement: wheel bearing – AUDI A4 (8E2, B6). Tip from AUTODOC experts:
    Important! Be sure to use new fasteners.The wheel bearing unit must not tilt on the axle pin.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the AUDI A4 B6 Saloon (8E2) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
AUDI A4 Saloon (8E2, B6) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
Autodoc CLUB App icon
DIY AUDI A4 Saloon (8E2, B6) Wheel Bearing replacement - online guide
Tips & tricks for your AUDI A4 Saloon (8E2, B6)
View more
  • How to change Wheel bearings on AUDI A4 Saloon (8E2, B6) 2.5 TDI quattro - replacement tricks
    How to paint a brake caliper | AUTODOC tips
  • Changing Hub bearing Audi A4 B6 1.9 TDI - Replacement Tips
    How to check your head gasket | AUTODOC
  • Maintenance Hacks - AUDI A4 Saloon (8E2, B6) 2.0 Wheel bearing kit replacement guide
    Things you should never do with an automatic transmission | AUTODOC tips
  • Replace Wheel hub bearing on Audi A4 B6 - free video tips
    DIY jack restoration | AUTODOC tips

Professional manuals for the most common AUDI models