Important!
This replacement procedure can be used for:
AUDI TT Roadster (8J9) 2.0 TFSI, AUDI TT Roadster (8J9) 2.0 TFSI quattro, AUDI TT Roadster (8J9) 2.5 RS quattro, AUDI TT Roadster (8J9) 2.0 TFSI, AUDI TT Roadster (8J9) 3.2 V6 quattro, AUDI TT Roadster (8J9) 2.0 TTS quattro, AUDI TT Roadster (8J9) 1.8 TFSI, AUDI TT Roadster (8J9) 2.0 TDI quattro, AUDI TT Roadster (8J9) 2.0 TTS quattro, AUDI TT Roadster (8J9) 2.0 TFSI quattro, AUDI TT Roadster (8J9) 2.5 RS quattro View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Control Arm for TT Roadster (8J9) and other AUDI models
Alternative products
How to change Suspension arm on Audi TT Roadster 2.0 TFSI – step-by-step instructions for straightforward car repair Suspension arm
Tools
Replacement: rear suspension lower trailing arm – AUDI TT Roadster (8J9). List of the tools you'll need:
Wire brush
WD-40 spray
Copper grease
Drive socket # 15
Drive socket # 16
Drive socket # 18
Combination spanner #16
XZN socket bit # 6
Wheel impact socket #17
Ratchet wrench
Torque wrench
Pin punch
Hammer
Tap wrench
Hydraulic transmission jack
Wheel chock
Replacement: rear suspension lower trailing arm – AUDI TT Roadster (8J9). Tip from AUTODOC experts:
  • The replacement procedure is identical for the left and right lower control arms.
  • All work should be done with the engine stopped.
Replacement: rear suspension lower trailing arm – AUDI TT Roadster (8J9). Recommended sequence of steps:
  1. Step 1
    How to change Control Arm on Audi TT Roadster 2007 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace AUDI TT Roadster (8J9) 2.0 TFSI 2008 Control Arm - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Audi TT Roadster 1.8 TFSI 2009 Control Arm replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: rear suspension lower trailing arm – AUDI TT Roadster (8J9). AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Control Arm on AUDI TT Roadster (8J9) 2.0 TDI quattro 2010 by yourself
    Remove the wheel.
  5. Step 6
    How to remove AUDI TT 3.2 V6 quattro 2011 Control Arm - online easy-to-follow instructions
    Support the arm. Use a hydraulic transmission jack.
  6. Step 7
    How to replace Control Arm on AUDI TT Roadster (8J9) 2012: download PDF manuals and video instructions
    Clean the control arm fasteners. Use a wire brush. Use WD-40 spray.
  7. Step 8
    How hard is it to do yourself: Control Arm replacement on Audi TT Roadster 2.0 TFSI quattro 2013 - download illustrated guide
    Disconnect the transverse stabilizer fastener from the link. Use a combination spanner #16. Use XZN #6. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Control Arm on AUDI TT 2014? This free workshop manual will help you to do it yourself
    Remove the retaining clip of the parking brake cable. Use a pin punch. Use a hammer.
  9. Step 10
    Changing of Control Arm on Audi TT Roadster 2007 won't be an issue if you follow this illustrated step-by-step guide
    Undo the bracket attaching the parking brake cable to the trailing arm.
  10. Step 11
    AUDI TT 1.8 TFSI Control Arm replacement: online guides and video tutorials
    Unscrew the fastener connecting the control arm to the rear knuckle. Use a drive socket #18. Use a tap wrench.
  11. Step 12
    Replacing Control Arm on Audi TT Roadster 2009 2.0 TFSI by yourself
    Unscrew the fastener connecting the trailing arm to the car body. Use a drive socket #15. Use a ratchet wrench.
  12. Step 13
    TT Roadster (8J9) 3.2 V6 quattro 2010 Control Arm DIY replacement workshop manual
    Remove the arm.
  13. Step 14
    How to change Control Arm on AUDI TT Roadster (8J9) 2011 - tips and tricks
    Unscrew the bracket fastening to the arm. Use a drive socket #18. Use a ratchet wrench.
  14. Step 15
    Step-by-step recommendations for DIY replacement Audi TT Roadster 2012 3.2 V6 quattro Control Arm
    Remove the bracket from the arm.
  15. Step 16
    DIY replacement of Control Arm on AUDI TT Roadster (8J9) 2.0 TTS quattro 2013 is not an issue anymore with our step-by-step tutorial
    Fit the new suspension trailing arm into the bracket. Use a drive socket #18. Use a torque wrench. Tighten it to 90 Nm torque.+90°
    AUTODOC recommends:
    Important! Be sure to use new fasteners.
  16. Step 17
    How to change Control Arm on Audi TT Roadster 2007 - free PDF and video manuals
    Install a new arm.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the AUDI TT Roadster (8J9) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY AUDI TT Roadster (8J9) Control Arm replacement - online guide
Tips & tricks for your AUDI TT Roadster (8J9)
View more
  • How to change Control arm on AUDI TT Roadster (8J9) 2.0 TTS quattro - replacement tricks
    5 more brake repair mistakes | Stop making these brake repair mistakes
  • Changing Wishbone Audi TT Roadster 2.0 TFSI - Replacement Tips
    Top 5 possible reasons your car is shaking or vibrating
  • Maintenance Hacks - AUDI TT Roadster (8J9) 1.8 TFSI Control arms replacement guide
    7 signs of faulty fuel injectors | AUTODOC tips
  • Replace Trailing arm on Audi TT Roadster - free video tips
    Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips

Professional manuals for the most common AUDI models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
AUDI TT Roadster (8J9) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME