Disclaimer
How to change rear strut mount on FORD C-Max II (DXA/CB7, DXA/CEU) – replacement guide
downloads:
8
Views:
92
Important!
This replacement procedure can be used for:
FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 Ti, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 Ti, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 EcoBoost, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 EcoBoost, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 TDCi, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 TDCi, FORD C-Max II (DXA/CB7, DXA/CEU) 2.0 TDCi, FORD C-Max II (DXA/CB7, DXA/CEU) 2.0 TDCi, FORD C-Max II (DXA/CB7, DXA/CEU) 2.0 TDCi, FORD C-Max II (DXA/CB7, DXA/CEU) 2.0 TDCi, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 Flexifuel, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 Ti, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 LPG, FORD C-Max II (DXA/CB7, DXA/CEU) 1.0 EcoBoost, FORD C-Max II (DXA/CB7, DXA/CEU) 1.0 EcoBoost, FORD C-Max II (DXA/CB7, DXA/CEU) 1.5 EcoBoost, FORD C-Max II (DXA/CB7, DXA/CEU) 1.5 EcoBoost, FORD C-Max II (DXA/CB7, DXA/CEU) 1.5 TDCi, FORD C-Max II (DXA/CB7, DXA/CEU) 1.5 TDCi ECOnetic, FORD C-Max II (DXA/CB7, DXA/CEU) 1.5 TDCi, FORD C-Max II (DXA/CB7, DXA/CEU) 2.0 TDCi, FORD C-Max II (DXA/CB7, DXA/CEU) 2.0 TDCi, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 Ti, FORD C-Max II (DXA/CB7, DXA/CEU) 2.0 Energi … View more
The steps may slightly vary depending on the car design.
FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 Ti, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 Ti, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 EcoBoost, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 EcoBoost, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 TDCi, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 TDCi, FORD C-Max II (DXA/CB7, DXA/CEU) 2.0 TDCi, FORD C-Max II (DXA/CB7, DXA/CEU) 2.0 TDCi, FORD C-Max II (DXA/CB7, DXA/CEU) 2.0 TDCi, FORD C-Max II (DXA/CB7, DXA/CEU) 2.0 TDCi, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 Flexifuel, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 Ti, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 LPG, FORD C-Max II (DXA/CB7, DXA/CEU) 1.0 EcoBoost, FORD C-Max II (DXA/CB7, DXA/CEU) 1.0 EcoBoost, FORD C-Max II (DXA/CB7, DXA/CEU) 1.5 EcoBoost, FORD C-Max II (DXA/CB7, DXA/CEU) 1.5 EcoBoost, FORD C-Max II (DXA/CB7, DXA/CEU) 1.5 TDCi, FORD C-Max II (DXA/CB7, DXA/CEU) 1.5 TDCi ECOnetic, FORD C-Max II (DXA/CB7, DXA/CEU) 1.5 TDCi, FORD C-Max II (DXA/CB7, DXA/CEU) 2.0 TDCi, FORD C-Max II (DXA/CB7, DXA/CEU) 2.0 TDCi, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 Ti, FORD C-Max II (DXA/CB7, DXA/CEU) 2.0 Energi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Strut Mount for C-Max II (DXA/CB7, DXA/CEU) and other FORD models
Alternative products

Wire brush
WD-40 spray
Copper grease
Drive socket # 10
Drive socket # 13
Drive socket # 16
Combination spanner #13
Combination spanner #16
Ratchet wrench
Torque wrench
Adjustable wrench
Vice
Wheel impact socket #19
Hydraulic transmission jack
Wheel chock
Replacement: strut mount – FORD C-MAX II. Tip from AUTODOC experts:
- The replacement procedure is identical for the mounts of the right and left shock absorbers of the rear suspension.
- Both mounts of the rear shock struts should be replaced simultaneously.
- All work should be done with the engine stopped.
Replacement: strut mount – FORD C-MAX II. Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: strut mount – FORD C-MAX II. AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Support the arm. Use a hydraulic transmission jack. - Step 7
Clean the fasteners of the shock absorber upper mount. Use a wire brush. Use WD-40 spray. - Step 8
Unscrew the shock absorber mount fastening. Use a drive socket #10. Use a ratchet wrench. - Step 9
Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray. - Step 10
Unscrew the lower fastener of the shock absorber. Use a drive socket #16. Use a ratchet wrench. Use a tap wrench.AUTODOC recommends:Important! Hold the shock absorber while unscrewing the fastening bolts. FORD C-MAX II - Step 11
Remove the shock absorber. - Step 12
Grip the shock absorber in a vice. - Step 13
Clean the shock absorber rod fastener. Use a wire brush. Use WD-40 spray. - Step 14
Remove the shock absorber piston rod fastening. Use a combination spanner #13. - Step 15
Remove the shock absorber mount, boot and bump stop. - Step 16
Install the new mount, boot, and bump stop on the shock absorber. - Step 17
Screw the shock strut piston rod upper fastening. Use a combination spanner #13. Use a drive socket #13. Use an adjustable wrench. Use a torque wrench. Tighten it to 25 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD C-Max II (DXA/CB7, DXA/CEU) model
Popular maintenance tutorials for Ford C Max 2
Complete guides for changing the Strut mount on different FORD C-MAX models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD C-Max II (DXA/CB7, DXA/CEU)
View more
5 tools that make car repair incredibly simple | AUTODOC tips
5 Ways You’re Scrubbing Your Car Wrong | AUTODOC Tips
How to repair a bumper yourself | AUTODOC tips
Transform Your Engine Bay: Affordable Valve Cover Restoration with AUTODOC
Most commonly replaced car parts on FORD C-MAX
Time to replace parts? Get even better deals in our Shop app.

SCAN ME































