Important!
This replacement procedure can be used for:
PEUGEOT PARTNER Box (5) 1.1, PEUGEOT PARTNER Box (5) 1.4, PEUGEOT PARTNER Box (5) 1.8 D, PEUGEOT PARTNER Box (5) 1.9 D, PEUGEOT PARTNER Box (5) 2.0 HDi, PEUGEOT PARTNER Box (5) 1.4 BiFuel, PEUGEOT PARTNER Box (5) 1.9 D 4x4, PEUGEOT PARTNER Box (5) 2.0 HDi 4x4, PEUGEOT PARTNER Box (5) 1.9 D, PEUGEOT PARTNER Box (5) 1.6 HDi 90, PEUGEOT PARTNER Box (5) 1.6, PEUGEOT PARTNER Box (5) 1.9 D, PEUGEOT PARTNER Box (5) 1.8, PEUGEOT PARTNER Box (5) Electric, PEUGEOT PARTNER Box (5) 1.8 D, PEUGEOT PARTNER Box (5) 1.6 HDi 75 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Shock Absorber for PARTNER Box (5) and other PEUGEOT models
Tools
Replacement: shock absorbers – PEUGEOT PARTNER Box (5). Tools you might need:
Wire brush
WD-40 spray
Ceramic grease
Copper grease
Torque wrench
Combination spanner #24
Drive socket # 24
Wheel impact socket #19
Ratchet wrench
Hydraulic transmission jack
Wheel chock
Replacement: shock absorbers – PEUGEOT PARTNER Box (5). Tip from AUTODOC:
  • Both shock absorbers of the rear suspension should be replaced simultaneously.
  • The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
  • Please note: all work on the car – PEUGEOT PARTNER Box (5) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Shock Absorber on Peugeot Partner Van 1996 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  2. Step 3
    Raise the car.
    Replacement: shock absorbers – PEUGEOT PARTNER Box (5). Professionals recommend:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 4
    How to replace PEUGEOT PARTNER Box (5) 1.9 D 1997 Shock Absorber - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. PEUGEOT PARTNER Box (5)
  3. Step 5
    Peugeot Partner Van 2.0 HDi 1998 Shock Absorber replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Shock Absorber on PEUGEOT PARTNER Box (5) 1.6 HDi 75 1999 by yourself
    Support the rear suspension beam. Use a hydraulic transmission jack.
  5. Step 7
    How to remove PEUGEOT PARTNER 1.4 2000 Shock Absorber - online easy-to-follow instructions
    Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 8
    How to replace Shock Absorber on PEUGEOT PARTNER Box (5) 2001: download PDF manuals and video instructions
    Unscrew the upper fastener of the shock absorber. Use a drive socket #24. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Shock Absorber replacement on Peugeot Partner Van 1.1 2002 - download illustrated guide
    Unscrew the lower fastener of the shock absorber. Use a combination spanner #24. Use a drive socket #24. Use a ratchet wrench.
  8. Step 10
    Need to know how to renew Shock Absorber on PEUGEOT PARTNER 2003? This free workshop manual will help you to do it yourself
    Remove the fastening bolt.
  9. Step 11
    Changing of Shock Absorber on Peugeot Partner Van 2004 won't be an issue if you follow this illustrated step-by-step guide
    Remove the shock absorber.
  10. Step 12
    PEUGEOT PARTNER 1.9 D Shock Absorber replacement: online guides and video tutorials
    Clean the shock absorber mounting seats. Use a wire brush. Use WD-40 spray.
  11. Step 13
    Replacing Shock Absorber on Peugeot Partner Van 2006 1.9 D by yourself
    Treat the shock absorber mounting seats. Use copper grease.
  12. Step 14
    PARTNER Box (5) 1.4 2007 Shock Absorber DIY replacement workshop manual
    Place the shock absorber in the wheel arch and fasten it.
    Replacement: shock absorbers – PEUGEOT PARTNER Box (5). Tip from AUTODOC:
    Before installing a new shock absorber you should pump it manually 3-5 times.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT Partner I Van model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PEUGEOT PARTNER Box (5) Shock Absorber replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT PARTNER Box (5) Shock Absorber replacement - online guide
Tips & tricks for your PEUGEOT PARTNER Box (5)
View more
  • How to change Shocks on PEUGEOT PARTNER Box (5) 1.6 HDi 90 - replacement tricks
    How and why to check your oil | AUTODOC tips
  • Changing Shock absorbers Peugeot Partner Van 1.9 D - Replacement Tips
    How to unlock your car without a key | AUTODOC tips
  • Maintenance Hacks - PEUGEOT PARTNER Box (5) 2.0 HDi Struts replacement guide
    How to wash your car in winter | AUTODOC tips
  • Replace Struts and shocks on Peugeot Partner Van - free video tips
    What to do if the ABS light comes on | AUTODOC tips