Disclaimer
How to change rear shock absorbers on PEUGEOT PARTNER Platform/Chassis – replacement guide
downloads:
6
Views:
143
Important!
This replacement procedure can be used for:
PEUGEOT PARTNER Platform/Chassis 2.0 HDi, PEUGEOT PARTNER Platform/Chassis 1.9 D … View more
The steps may slightly vary depending on the car design.
PEUGEOT PARTNER Platform/Chassis 2.0 HDi, PEUGEOT PARTNER Platform/Chassis 1.9 D … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Shock Absorber for PARTNER Platform/Chassis and other PEUGEOT models
Alternative products

Wire brush
WD-40 spray
Ceramic grease
Copper grease
Torque wrench
Combination spanner #24
Drive socket # 24
Wheel impact socket #19
Ratchet wrench
Hydraulic transmission jack
Wheel chock
Replacement: shock absorbers – PEUGEOT PARTNER Platform/Chassis. Tip from AUTODOC:
- Both shock absorbers of the rear suspension should be replaced simultaneously.
- The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
- Please note: all work on the car – PEUGEOT PARTNER Platform/Chassis – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the car.Replacement: shock absorbers – PEUGEOT PARTNER Platform/Chassis. Professionals recommend:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. PEUGEOT PARTNER Platform/Chassis - Step 5
Remove the wheel. - Step 6
Support the rear suspension beam. Use a hydraulic transmission jack. - Step 7
Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray. - Step 8
Unscrew the upper fastener of the shock absorber. Use a drive socket #24. Use a ratchet wrench. - Step 9
Unscrew the lower fastener of the shock absorber. Use a combination spanner #24. Use a drive socket #24. Use a ratchet wrench. - Step 10
Remove the fastening bolt. - Step 11
Remove the shock absorber. - Step 12
Clean the shock absorber mounting seats. Use a wire brush. Use WD-40 spray. - Step 13
Treat the shock absorber mounting seats. Use copper grease. - Step 14
Place the shock absorber in the wheel arch and fasten it.Replacement: shock absorbers – PEUGEOT PARTNER Platform/Chassis. Tip from AUTODOC:Before installing a new shock absorber you should pump it manually 3-5 times.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT Partner I Platform / Chassis model
Popular maintenance tutorials for PEUGEOT PARTNER Platform/Chassis
Complete guides for changing the Shock absorbers on different PEUGEOT PARTNER models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PEUGEOT PARTNER Platform/Chassis
View more
DIY alternator repair | AUTODOC tips
Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
How to unlock your car without a key | AUTODOC tips
The Ultimate Guide to Engine Bay Cleaning | AUTODOC
Most commonly replaced car parts on PEUGEOT PARTNER
ОЕ number
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



























