
Disclaimer
How to change rear shock absorbers on Ford Transit Mk7 van – replacement guide
downloads:
0
Views:
1
Important!
This replacement procedure can be used for:
FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi … View more
The steps may slightly vary depending on the car design.
FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi … View more
The steps may slightly vary depending on the car design.
How to change rear shock absorbers on the FORD TRANSIT MK7 [AUTODOC TUTORIAL]

All the parts you need to replace – Shock Absorber for Transit Mk6 Box (V347, V348, FA) and other FORD models
Alternative products

A wire brush
WD-40 spray
An all-purpose cleaning spray
Ceramic grease
A torque wrench
A 15 mm combination spanner
An 18 mm combination spanner
A 21 mm combination spanner
A 15 mm socket
An 18 mm socket
A 21 mm socket
A 21 mm wheel impact socket
A ratchet wrench
A tommy bar
A transmission jack
Wheel chocks
Replacement: shock absorbers – Ford Transit Mk7 van. AUTODOC recommends:
- Replace shock absorbers in pairs on an axle.
- The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
- All the work should be carried out with the engine switched off.
Replacement: shock absorbers – Ford Transit Mk7 van. Recommended sequence of steps:
- Step 1
If you are going to use a jack, secure the wheels with chocks. - Step 2
Loosen the wheel nuts. Use a 21 mm wheel impact socket. Use a tommy bar. - Step 3
Raise the car.Warning!If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands. - Step 4
Unscrew the wheel nuts.Caution!To avoid injury, hold up the wheel when unscrewing the nuts. - Step 5
Remove the wheel. - Step 6
Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Prop up the rear axle beam. If the car has been raised on a lift, use a hydraulic transmission jack. - Step 8
Unscrew the upper fastener of the shock absorber. Use a 21 mm combination spanner. Use an 18 mm socket. Use a ratchet wrench. - Step 9
Unscrew the lower fastener of the shock absorber. Use an 18 mm combination spanner. Use a 15 mm socket. Use a ratchet wrench. - Step 10
Remove the fastening bolts. - Step 11
Remove the shock absorber. - Step 12
Clean the shock absorber mounting seats. Use a wire brush. Use an all-purpose cleaning spray. - Step 13
Place the new shock absorber under the wheel arch.AUTODOC recommendation:Before installing a new shock absorber, you should prime it by pumping it 3–5 times by hand. - Step 14
Install the fastening bolts.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Transit Mk6 Van (V347, V348) model
Popular maintenance tutorials for Ford Transit Mk6 Van
Complete guides for changing the Shock absorbers on different FORD TRANSIT models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD Transit Mk6 Box (V347, V348, FA)
View more
How to unlock your car without a key | AUTODOC tips
Cold starts | 5 mistakes that wreck your car
BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
Top 5 possible reasons your car is shaking or vibrating
Most commonly replaced car parts on FORD TRANSIT
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


































