
Disclaimer
How to change rear shock absorbers on FORD Transit Mk6 Minibus (V347, V348) – replacement guide
downloads:
0
Views:
0
Important!
This replacement procedure can be used for:
FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi … View more
The steps may slightly vary depending on the car design.
FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Shock Absorber for Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) and other FORD models
Alternative products

A wire brush
WD-40 spray
An all-purpose cleaning spray
Ceramic grease
A torque wrench
A 15 mm combination spanner
An 18 mm combination spanner
A 21 mm combination spanner
A 15 mm socket
An 18 mm socket
A 21 mm socket
A 21 mm wheel impact socket
A ratchet wrench
A tommy bar
A transmission jack
Wheel chocks
Replacement: shock absorbers – FORD TRANSIT Bus. AUTODOC recommends:
- Replace shock absorbers in pairs on an axle.
- The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
- All the work should be carried out with the engine switched off.
Replacement: shock absorbers – FORD TRANSIT Bus. Recommended sequence of steps:
- Step 1If you are going to use a jack, secure the wheels with chocks.Step 2
Loosen the wheel nuts. Use a 21 mm wheel impact socket. Use a tommy bar. - Step 3Raise the car.Warning!If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands.Step 4
Unscrew the wheel nuts.Caution!To avoid injury, hold up the wheel when unscrewing the nuts. - Step 5
Remove the wheel. - Step 6
Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Prop up the rear axle beam. If the car has been raised on a lift, use a hydraulic transmission jack. - Step 8
Unscrew the upper fastener of the shock absorber. Use a 21 mm combination spanner. Use an 18 mm socket. Use a ratchet wrench. - Step 9
Unscrew the lower fastener of the shock absorber. Use an 18 mm combination spanner. Use a 15 mm socket. Use a ratchet wrench. - Step 10
Remove the fastening bolts. - Step 11
Remove the shock absorber. - Step 12
Clean the shock absorber mounting seats. Use a wire brush. Use an all-purpose cleaning spray. - Step 13
Place the new shock absorber under the wheel arch.AUTODOC recommendation:Before installing a new shock absorber, you should prime it by pumping it 3–5 times by hand. - Step 14
Install the fastening bolts.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Transit Mk6 Minibus (V347, V348) model
Popular maintenance tutorials for Ford Transit Mk6 Minibus
Complete guides for changing the Shock absorbers on different FORD TRANSIT models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC)
View more
Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
Don’t Replace, Restore: Fixing Damaged Threads at Home
The most common problems when buying a used car | AUTODOC
Transform Your Old Engine Valve Cover: Quick Polishing Tips for a Shiny Finish | AUTODOC Tips
Most commonly replaced car parts on FORD TRANSIT
ОЕ number
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


































