Important!
This replacement procedure can be used for:
FORD MONDEO I (GBP) 1.8 TD, FORD MONDEO I (GBP) 1.6 i 16V, FORD MONDEO I (GBP) 1.8 i 16V, FORD MONDEO I (GBP) 2.0 i 16V, FORD MONDEO I (GBP) 1.8 i 16V, FORD MONDEO I (GBP) 2.5 i 24V, FORD MONDEO I (GBP) 1.6 i 16V, FORD MONDEO I (GBP) 2.0 i 16V 4x4, FORD MONDEO I (GBP) 1.8 TD, FORD MONDEO I (GBP) 2.0 i 16V, FORD MONDEO I (GBP) 1.8 i 16V 4x4 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Shock Absorber for MONDEO I (GBP) and other FORD models
Alternative products
How to change Shock absorber on Ford Mondeo MK1 GBP 1.8 i 16V – step-by-step instructions for straightforward car repair Shock absorber
Tools
Replacement: shock absorbers – FORD MONDEO I (GBP). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
Drive socket # 15
Drive socket # 18
Wheel impact socket #19
Ratchet wrench
Torque wrench
Tap wrench
Hydraulic transmission jack
Wheel chock
Replacement: shock absorbers – FORD MONDEO I (GBP). AUTODOC recommends:
  • Both shock absorbers of the rear suspension should be replaced simultaneously.
  • The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
  • All work should be done with the engine stopped.
Replacement: shock absorbers – FORD MONDEO I (GBP). Take the following steps:
  1. Step 1
    How to change Shock Absorber on Ford Mondeo MK1 GBP 1993 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace FORD MONDEO I (GBP) 1.8 i 16V 1994 Shock Absorber - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Ford Mondeo MK1 GBP 2.0 i 16V 1995 Shock Absorber replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. FORD MONDEO I (GBP)
  4. Step 5
    Changing Shock Absorber on FORD MONDEO I (GBP) 1.6 i 16V 1996 by yourself
    Remove the wheel.
  5. Step 6
    How to remove FORD MONDEO 2.5 i 24V 1993 Shock Absorber - online easy-to-follow instructions
    Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Shock Absorber on FORD MONDEO I (GBP) 1994: download PDF manuals and video instructions
    Unscrew the lower fastener of the shock absorber. Use a drive socket #18. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Shock Absorber replacement on Ford Mondeo MK1 GBP 1.8 i 16V 1995 - download illustrated guide
    Support the stub axle. Use a hydraulic transmission jack.
  8. Step 9
    Need to know how to renew Shock Absorber on FORD MONDEO 1996? This free workshop manual will help you to do it yourself
    Remove the fastening bolt.
  9. Step 10
    Changing of Shock Absorber on Ford Mondeo MK1 GBP 1993 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the upper fastener of the shock absorber. Use a combination spanner #18. Use a drive socket #15. Use a ratchet wrench. Use a tap wrench.
    Replacement: shock absorbers – FORD MONDEO I (GBP). AUTODOC experts recommend:
    To avoid injuries, hold the shock absorber when undoing the fastening bolts.
  10. Step 11
    Remove the fastening bolt.
    Step 12
    FORD MONDEO 1.8 TD Shock Absorber replacement: online guides and video tutorials
    Remove the shock absorber.
    Replacement: shock absorbers – FORD MONDEO I (GBP). Professionals recommend:
    Before installing a new shock absorber you should pump it manually 3-5 times.
  11. Step 13
    Replacing Shock Absorber on Ford Mondeo MK1 GBP 1995 1.8 i 16V by yourself
    Place the shock absorber in the wheel arch and secure it.
    Replacement: shock absorbers – FORD MONDEO I (GBP). Tip from AUTODOC:
    To avoid injury, hold the shock absorber cautiously tight when screwing in the fastening bolts.
  12. Step 14
    MONDEO I (GBP) 2.5 i 24V 1996 Shock Absorber DIY replacement workshop manual
    Install the fastening bolts (2 pieces).
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FORD Mondeo Mk1 Hatchback (GBP) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY FORD MONDEO I (GBP) Shock Absorber replacement - online guide
Tips & tricks for your FORD MONDEO I (GBP)
View more
  • How to change Shock absorbers on FORD MONDEO I (GBP) 1.8 TD - replacement tricks
    How to tighten cylinder head bolts
  • Changing Shocks Ford Mondeo MK1 GBP 1.8 i 16V - Replacement Tips
    How to restore a steering wheel | AUTODOC tips
  • Maintenance Hacks - FORD MONDEO I (GBP) 2.0 i 16V Struts replacement guide
    5 most common causes of oil leaks | AUTODOC tips
  • Replace Struts and shocks on Ford Mondeo MK1 GBP - free video tips
    Understanding Airbag Light Warnings | Essential Tips for Car Safety
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
FORD MONDEO I (GBP) Shock Absorber replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME