How to carry out replacement: Shock Absorber 1.4 TDCi Ford Fusion ju2
Disclaimer
Change Ford Fusion ju2 1.4 Shock Absorber yourself – manuals and video tutorials

How to change rear shock absorbers on FORD FUSION (JU_) – replacement guide

downloads: 20
Views: 483
Download your free tutorial and fix FORD FUSION (JU_) 1.4 TDCi problems yourself Download for free 2.06 MB Shock Absorber for Ford Fusion ju2 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
FORD FUSION (JU_) 1.4 LPG … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Shock Absorber for FUSION (JU_) and other FORD models
Alternative products
How to change Shock absorber on Ford Fusion ju2 1.4 TDCi – step-by-step instructions for straightforward car repair Shock absorber
Tools
Replacement: shock absorbers – FORD FUSION (JU_). Tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #13
Drive socket # 10
Drive socket # 15
Wheel impact socket #19
Ratchet wrench
Torque wrench
Shock absorber socket #DD6
Clip removal tool
Hydraulic transmission jack
Wheel chock
Buy tools
Replacement: shock absorbers – FORD FUSION (JU_). Tip from AUTODOC:
  • Both shock absorbers of the rear suspension should be replaced simultaneously.
  • The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
  • All work should be done with the engine stopped.
Replacement: shock absorbers – FORD FUSION (JU_). Use the following procedure:
  1. Step 1
    How to change Shock Absorber on Ford Fusion ju2 2002 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace FORD FUSION (JU_) 1.4 TDCi 2003 Shock Absorber - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Ford Fusion ju2 1.4 2004 Shock Absorber replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. FORD FUSION (JU_)
  4. Step 5
    Changing Shock Absorber on FORD FUSION (JU_) 1.6 TDCi 2005 by yourself
    Remove the wheel.
  5. Step 6
    How to remove FORD FUSION 1.25 2006 Shock Absorber - online easy-to-follow instructions
    Unscrew and remove the wheel arch cover fasteners. Use a clip removal tool.
  6. Step 7
    How to replace Shock Absorber on FORD FUSION (JU_) 2007: download PDF manuals and video instructions
    Move the part aside.
  7. Step 8
    How hard is it to do yourself: Shock Absorber replacement on Ford Fusion ju2 1.3 2008 - download illustrated guide
    Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 9
    Need to know how to renew Shock Absorber on FORD FUSION 2009? This free workshop manual will help you to do it yourself
    Support the rear suspension beam. Use a hydraulic transmission jack.
  9. Step 10
    Changing of Shock Absorber on Ford Fusion ju2 2010 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the upper fastener of the shock absorber. Use a drive socket #10. Use a ratchet wrench.
  10. Step 11
    FORD FUSION 1.4 Shock Absorber replacement: online guides and video tutorials
    Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray.
  11. Step 12
    Replacing Shock Absorber on Ford Fusion ju2 2012 1.4 TDCi by yourself
    Unscrew the lower fastener of the shock absorber. Use a drive socket #15. Use a ratchet wrench.
  12. Step 13
    FUSION (JU_) 1.25 2002 Shock Absorber DIY replacement workshop manual
    Remove the mounting from under the rear axle beam.
    Replacement: shock absorbers – FORD FUSION (JU_). AUTODOC recommends:
    Lower the hydraulic transmission jack smoothly, without jerks, to avoid damaging assemblies and mechanisms.
  13. Step 14
    How to change Shock Absorber on FORD FUSION (JU_) 2003 - tips and tricks
    Remove the shock absorber.
  14. Step 15
    Step-by-step recommendations for DIY replacement Ford Fusion ju2 2004 1.25 Shock Absorber
    Clean the shock absorber rod fastener. Use a wire brush. Use WD-40 spray.
  15. Step 16
    DIY replacement of Shock Absorber on FORD FUSION (JU_) 1.6 2005 is not an issue anymore with our step-by-step tutorial
    Remove the shock absorber piston rod fastening. Use a combination spanner #13. Use a shock absorber socket #DD6.
  16. Step 17
    How to change Shock Absorber on Ford Fusion ju2 2002 - free PDF and video manuals
    Remove the shock absorber mount, boot and bump stop.
    AUTODOC recommends:
    Replacement: shock absorbers – FORD FUSION (JU_). Carefully inspect the mount, the boot, and the bump stop of the shock absorber. Replace if necessary.Before installing a new shock absorber you should pump it manually 3-5 times.
  17. Step 18
    How to replace FORD FUSION (JU_) 1.4 TDCi 2003 Shock Absorber - step-by-step manuals and video guides
    Install the mount, boot and bump stop onto a new shock absorber.
  18. Step 19
    Ford Fusion ju2 1.4 2004 Shock Absorber replacement: free workshop manuals
    Tighten the shock absorber rod nut. Use a combination spanner #13. Use a shock absorber socket #DD6. Use a torque wrench. Tighten it to 25 Nm torque.
  19. Step 20
    Changing Shock Absorber on FORD FUSION (JU_) 1.6 TDCi 2005 by yourself
    Clean the shock absorber mounting seats. Use a wire brush. Use WD-40 spray.
  20. Step 21
    How to remove FORD FUSION 1.25 2006 Shock Absorber - online easy-to-follow instructions
    Place the shock absorber in the wheel arch and secure it.
    AUTODOC recommends:
    Important! Hold the shock absorber while screwing in the fastening bolts. FORD FUSION (JU_)
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FORD Fusion Estate (JU2) model

Ford Fusion ju2 tyre size

Popular maintenance tutorials for Ford Fusion ju2

More manuals for Ford Fusion ju2

Complete guides for changing the Shock absorbers on different FORD FUSION models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY FORD FUSION (JU_) Shock Absorber replacement - online guide
Tips & tricks for your FORD FUSION (JU_)
View more
  • How to change Shock absorbers on FORD FUSION (JU_) 1.6 - replacement tricks
    The Fast and Easy Way to Fix a Broken Wheel Stud | AUTODOC tips
    9K views
    Published on: 08/12/2020
  • Changing Shocks Ford Fusion ju2 1.4 TDCi - Replacement Tips
    CHECK ENGINE light turned on – step-by-step guide on what to do
    4K views
    Published on: 10/07/2025
  • Maintenance Hacks - FORD FUSION (JU_) 1.4 Struts replacement guide
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
    14K views
    Published on: 15/06/2023
  • Replace Struts and shocks on Ford Fusion ju2 - free video tips
    Why Is the Windscreen Washer Not Spraying? Solution
    5K views
    Published on: 25/04/2025

Most commonly replaced car parts on FORD FUSION

Professional manuals for the most common FORD models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
FORD FUSION (JU_) Shock Absorber replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME